5419 1/2" 3M, 5419 1/2" Datasheet - Page 2

• Manufacturer Part Number: 5419 1/2"
• Description: Tapes & Mastics POLYMIDE 1/2X36YD
• Manufacturer: 3M
• Type: Platingr

Specifications of 5419 1/2"

• Product: Tape
• Size: 1/2 in x 36 yds
• Description/function: Low Static Polyimide Film Tape Series 5419
• Color: Gold
• Adhesion To Steel: 20 Oz.⁄in.
• Adhesive: Silicone
• Dielectric Strength: 7000 V
• Elongation: 60%
• Length, Tape Roll: 33 m
• Resistance, Insulation: >1 x 10 ^6 Ohms
• Temperature Range: -73 to +260 °C
• Tensile Strength: 33 lbs.⁄in.
• Thickness, Tape: 0.07 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 2120030226

3M
Features
• Employs a proprietary technology that results in extremely low electrostatic discharge at unwind and removal from the
• At room temperature the properties of polyimide and polyester film are similar. However, as the temperature increases or
• Polyimide film does not soften at elevated temperatures, thus, the film provides an excellent release surface at elevated
• Gold tab protection during wave solder of printed circuit boards.
• RoHS compliant.
Application Ideas
• Mask for printed circuit boards during wave solder or solder dip process.
• Used as release surface in fabrication of parts cured at elevated temperatures.
Storage
Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 50% R.H. in the original carton.
Shelf Life
To obtain best performance, use this product within 3 years from date of manufacture.
PWB. Conventional polyimide tapes can typically generate over 10,000 volts during use which can damage board
mounted electronic components. 3M™ Low Static Polyimide Film Tape 5419 overcomes this problem without any of
the typical drawbacks of conventional “anti-static” or “static-free” tapes (e.g., variable adhesion and opaqueness).
decreases, the properties of the polyimide film are less affected than polyester.
temperatures.
™
Low Static Polyimide Film Tape 5419
(2)