9712-1/2"X36YD 3M, 9712-1/2"X36YD Datasheet - Page 4

• Manufacturer Part Number: 9712-1/2"X36YD
• Description: Tapes & Mastics ELECT CONDUCTVE TAPE ACRYLIC 1/2 X 36YD
• Manufacturer: 3M

Specifications of 9712-1/2"X36YD

• Product: Tape
• Size: 1/2 in x 36 yds
• Description/function: XYZ Axis Electrically Conductive Adhesive Transfer Tape
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 2120046182

3M
9712
Limitation of Remedies
and Liability
Application Ideas
(continued)
Recognition/
Certification
For Additional
Information
Important Notice
3
Electronic Adhesives and Specialties Department
Engineered Adhesives Division
3M Center, Building 220-7E-01
St. Paul, MN 55144-1000
TM
XYZ-Axis Electrically Conductive Tape
If the
REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE
3
consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence,
warranty, or strict liability.
To request additional product information or to arrange for sales assistance, call toll free 1-800-362-3550
or visit www.3M.com/adhesives. Address correspondence to:
Center, Building 220-7E-01, St. Paul, MN 55144-1000. Our fax number is 651-733-9175. In Canada,
phone: [phone]. In Puerto Rico, phone: [phone]. In Mexico, phone: [phone].
3
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is
responsible for determining whether the
method of application. Please remember that many factors can affect the use and performance of a
product in a particular application. The materials to be bonded with the product, the surface preparation
of those materials, the product selected for use, the conditions in which the product is used, and the time
and environmental conditions in which the product is expected to perform are among the many factors
that can affect the use and performance of a
use and performance of a
control, it is essential that the user evaluate the
purpose and suitable for the user’s method of application.
This Engineered Adhesives Division product was manufactured under a 3M quality system registered to ISO 9002 standards.
• Attaching EMI Gaskets
• Grounding Computer Antistatic and Glare Reduction Screens
MSDS: 3M has not prepared a MSDS for this product which is not subject to the MSDS requirements of
the Occupational Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R.
1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M directions
for use, the product should not present a health and safety hazard. However, use or processing of the
product in a manner not in accordance with the directions for use may affect its performance and present
potential health and safety hazards.
TSCA: This product is defined as an article under the Toxic Substances Control Act and therefore, it is
exempt from inventory listing requirements.
M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or
M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
3M™ XYZ-Axis Electrically Conductive Tape 9712 may also be used for attaching
EMI gaskets to electronic cabinets, such as server cabinets or disk drive array
cabinets. These gaskets typically consist of conductive fabric over a foam core,
and come in a variety of shapes and sizes. 3M tape 9712 may be cut into strips as
narrow as 1/8 inch to provide adhesion for even the narrowest of gaskets. 3M tape
9712 may also be pre-applied to the gasket for reduced final cabinet assembly time.
Computer antistatic and glare reduction screens need to be electrically attached to
the grounding mechanism. 3M tape 9712 penetrates through anti-smudge coatings
over the conductive layer to make an electrical connection. Placing 3M tape 9712
along the edges of such a screen provides many connection points to the antistatic
coating resulting in good electrical performance.
3
M product is proved to be defective, THE EXCLUSIVE REMEDY, AT
3
M product, some of which are uniquely within the user’s knowledge and
- 4 -
Recycled Paper
40% pre-consumer
10% post-consumer
3
M product is fit for a particular purpose and suitable for user’s
3
M product. Given the variety of factors that can affect the
ISO 9002
3
M product to determine whether it is fit for a particular
3
M Engineered Adhesives Division,
3
M’S OPTION, SHALL BE TO
Printed in U.S.A.
©3M 2001
70-0709-3911-4
3
M PRODUCT.
3
3
(8/9/01)
M
M