141-0000-907 Emerson Network Power, 141-0000-907 Datasheet - Page 257

• Manufacturer Part Number: 141-0000-907
• Description: Crimping, Stripping, Cutting Tools & Drills SMA CRIMP INDEXER
• Manufacturer: Emerson Network Power
• Type: Turret Positionerr

Specifications of 141-0000-907

• Product: Crimping, Stripping & Cutting Tools & Drills
• Description/function: Positions crimp location on contact with no user setup required
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 3 Piece SMA Contact Hand Crimp Tool

Standard UHF Straight 2-Piece Crimp Type Jack
for Flexible Cable
PART NO.
CPF-249-1
Connectivity Solutions
CABLE
RG-58
WIRE GAUGE
20
Tel: [phone]
WIRE DECIMAL
.325 (0.83)
•
Fax: [phone]
.185 (4.70)-.205 (5.21)
JACKET O.D.
Assembly Instructions
•
www.EmersonNetworkPower.com/connectivity
(BRAID HEX)
.320 (8.13)
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
CRIMP
1. Identify connector parts. (2 piece parts)
2. Slide crimp sleeve over cable and strip
3. Flair braid and fold back. Strip cable insu-
4. Insert center conductor into the guide hole
5. Arrange braid uniformly around crimp stem.
cable jacket to dimension shown. Do not
nick braid or center conductor during strip
operations.
lation to dimension shown. Do not nick
center conductor.
found in the rear of the connector body.
Twist the body onto the center conductor
until the cable insulation butts up to the
body.
Slide crimp sleeve over braid and crimp
securely using recommended crimp tool.
(STRAIN RELIEF)
.211 (5.36)
CRIMP
RECOMMENDED
CRIMP TOOL
24-9858P
257