DFP-CN2 OK International, DFP-CN2 Datasheet

no-image

DFP-CN2

Manufacturer Part Number
DFP-CN2
Description
Soldering Tools Desolder Tip ID 0.25 (.64mm)
Manufacturer
OK International
Type
Standard desoldering Tipsr
Datasheet
1.MFR-DSI.pdf (4 pages)

Specifications of DFP-CN2

Tip Size
0.026 in
Description/function
0.026 in desoldering standard tip
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Versatile Pencil and Pistol Grip Combination Hand-
piece System
The MFR Desoldering Systems provides superior thermal transfer to the joint, effectively reflowing
the solder and then quickly and efficiently removing all solder. SmartHeat technology makes
through-hole Desoldering easy and safe from board damage. The state-of-the-art hand-piece can be
adjusted from a pencil to a gun with a simple press of a button. Operators can find the most
comfortable and efficient position to tackle the rework challenge. The paper solder collection
chamber and filter system is quick and easy to change, and provides low cost maintenance.
Two MFR Desoldering Systems are available. The MFR-DSX system requires shop air for desoldering.
If shop air is not available, the MFR-DSI features an internal vacuum pump
Part No.
MFR-DSX
MFR-DSI
INCLUDES
MFR-PS2X
MFR-PS2K
MFR-HDS
Description
Desolder System, External Air
Desolder System, Internal Air Pump
Two Port Universal Voltage Power Supply, External Air (MFR-DSX only)
Two Port Universal Voltage Power Supply, with Internal Air Pump (MFR-
DSI only)
Desolder Hand-piece
MFR DESOLDER SYSTEMS
MFR-DSI, MFR-SDI, MFR-DSX, MFR-SDX
Ambient Operating
Maximum Enclosure
Input Line
Input Line
Power
Output Power:
50 Watts max. at 22°C ambient temperature
Output
Power Cord
Power Supply Dimensions w x d x h:
170mm x 200mm x 152.5mm (7" x 8" x 6")
Agency Tested
CFR Part 15
Tip-to-Ground
Tip-to-Ground
Idle Temperature
Hand-piece Cable Length:
L=71cm (48"), burn proof, ESD safe
Connector:8-pin power connector
Workstand Dimensions w x d x h:
100 mm x 200 mm x 100 mm (4" x 8" x 4")
Recommended Air Pressure
Consumption:90 Watts max.
Frequency:450 KHz
Voltage:100- 240 VAC, grounded circuit
Frequency:50/60 Hz
3-Wire:183cm (18/3") SJT
Potential:< 2mV
Resistance:< 2 ohms
Per:IEC 60335-2-45 and UL499, FCC
Stability:± 1.1°C in still air
Temperature:10- 40°C
Temperature:55°C
Input:450kPa (65PSI) -

DFP-CN2 Summary of contents

Page 1

Versatile Pencil and Pistol Grip Combination Hand- piece System The MFR Desoldering Systems provides superior thermal transfer to the joint, effectively reflowing the solder and then quickly and efficiently removing all solder. SmartHeat technology makes through-hole Desoldering easy and safe ...

Page 2

... All of the standard MFR Series power tips & rework cartridges are designed for use with glass fiber (FR4) PCB substrates. This is denoted by the second letter in the part number: "F". For example: SFP-CH10, DFP-CN3, and SFV-CNL10. However, some specialist applications require working with thermally demanding or temperature sensitive substrates, such as ceramic hybrids or flexible circuits ...

Page 3

... The tips are supplied in a range of diameters as well long reach configuration to allow improved access on tightly packed PCBs. Regular Long Reach REGULAR Part No. Description Ø (in) DFP-CN2 Desolder Tip 0.67 mm (.026") DFP-CN3 Desolder Tip 0.79 mm (.031") DFP-CN4 Desolder Tip 1.05 mm (.041") ...

Page 4

... DFP-CNL5 Desolder Tip, Long Reach 1.31 mm (.052") To order specialty versions of the Standard Tweezer Cartridges replace the "F" in the part number with the appropriate letter designate for your application when ordering Temperature Sensitive C = Ceramic or Heavy Load Dimensions and artwork listed are for indication/guidance only. Numbers have been rounded up. ...