DLRO200-115E Megger, DLRO200-115E Datasheet - Page 2

• Manufacturer Part Number: DLRO200-115E
• Description: Digital Multimeters 200 Amp DLRO
• Manufacturer: Megger

Specifications of DLRO200-115E

• Accuracy: +/- 2 %
• Resistance Range: 999.9 Ohms
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

UK
Archcliffe Road Dover
CT17 9EN England
T [phone]
F [phone]
SPECIFICATIONS
Measurement:
Range: 0.1 µΩ to 999.9 mΩ
(Subject to supply voltage and leads used)
Accuracy:
Current Lead Resistance (Megger supplied leads)
2 x 16 ft (5 m) 25 mm
2 x 16 ft (5 m) 50 mm
2 x 33 ft (10 m) 70 mm
2 x 49 ft (15 m) 95 mm
Maximum Continuous Test Time
More than 10 minutes at 200 A @ 68° F (20º C) ambient.
Power Supply
for full output (additional smoothed):
out a test. As soon as the potential leads are connected, a
test will start. To repeat a test, simply break contact with
the voltage probes and remake contact.
Measuring individual joints in a busbar is a good example
of the convenience to be gained by using AUTO mode.
The two current leads are connected to the ends of the
busbar. They will remain connected there until all tests
have been completed. When the voltage leads make
contact across a joint, the DLRO200-115 detects that all
four leads are connected, carries out a test and stops.
When you move to the next joint the DLRO200-115
detects the already completed circuit automatically and
carries out the next test, and so on until all joints have
been tested. The results may be stored automatically and
may be recalled to the display or downloaded for review.
Item (Qty)
DLRO200-115 High Current Digital Low Resistance Ohmmeter
115 V (English QWERTY keyboard)
Included Accessories
16 ft. (5 m) Lead set comprising 2 x 25 mm
current leads with clips and 2 potential
leads with clips
Download Manager
User Guide on CD-ROM
RS232 download cable
Quick Start Guide (English)
Voltage:
Current:
Resistance: Better than 1% from
100 to 130 V 50/60 HZ with a load
less than 11 mΩ including current leads
±0.5% ± 0.1 mV
±0.5% ± 0.1 A
100 µΩ to 100 mΩ
2
2
2
2
current leads
current leads
current leads
current leads
UNITED STATES
4271 Bronze Way
Dallas TX 75237-1019 USA
T 800 723 2861 (USA only)
T [phone]
F [phone]
8 mΩ
4 mΩ
5.4 mΩ
6 mΩ
2
DLRO200-115 E
ORDERING INFORMATION
25955-025
Cat No.
6220-787
6111-442
6172-763
6172-782
Item (Qty)
Optional Accessories at extra cost
16 ft. (5m) Lead set in bag comprising:
2 x 50mm
2 x potential leads with clips.
49 ft. (15m) Lead set comprising 2 x 95 mm
current leads with clamps and
2 x potential leads with clips.
33 ft. (10m) Lead set comprising 2 x 70 mm
current leads with clamps and
2 x potential leads with clips.
Test Modes:
Test Time:
Display:
Warnings
Data Transfer
Storage Capacity:
Memo field:
Test Current
Range:
Accuracy:
Voltmeter input
impedance:
Hum rejection:
Temperature
Operation:
Storage:
Calibration:
Co-efficient:
Max. Humidity:
Maxi Altitude:
Safety:
EMC:
Dimensions:
Weight:
OTHER TECHNICAL SALES OFFICES
Norristown USA, Toronto CANADA,
Mumbai INDIA, Trappes FRANCE,
Sydney AUSTRALIA, Madrid SPAIN
and the Kingdom of BAHRAIN.
2
current leads with clamps and
Manual, Auto, Continuous.
10 seconds NORMAL /AUTO mode.
Refreshed every 2 seconds in CONTINUOUS
mode
Large, high resolution backlit liquid crystal
display
Current flowing: - LED. Other warnings are
shown on the lcd display.
Real time or batch download via RS232
using Download Manager.
300 result sets and memo, battery backed
for 10 years.
160 characters max.
Filtered direct current; 10 A to 200 A d.c.
±2% ±2 A
>200 kΩ
5 V rms 50 Hz/60 Hz
14 to +122º F (-10 to +50º C)
-13 to 149º F (-25 to +65º C)
68° F (20º C)
<0.05% per º C
95% RH non-condensing
6562 ft. (2000 m)
IEC61010 – (1995)
EN61326 annex A (heavy industrial)
16.4 x 9.84 x 10.63 in.
(410 x 250 x 270 mm)
31.97 lbs. (14.5 kg) excluding test leads
Digital Low Resistance Ohmmeter
Registered to ISO 9001:2000 Reg no. Q 09290
Registered to ISO 14001 Reg no. EMS 61597
DLRO200-115_DS_en_V01
www.megger.com
Megger is a registered trademark
2
2
DLRO 200-115
6220-755
6220-757
6220-756
Cat No.