DR2000-DK RFM, DR2000-DK Datasheet - Page 3

• Manufacturer Part Number: DR2000-DK
• Description: RF Modules & Development Tools 2G Development Kit 916.5MHz
• Manufacturer: RFM

Specifications of DR2000-DK

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

area or any area where radio devices might be subject to harmful electrical interference. This Kit
has not been certified for use by the FCC in accord with Part 15, or to ETSI I-ETS 300 220 or
I-ETS 300 220-1 regulations, or other known standards of operation governing radio emissions.
Distribution and sale of the Kit is intended solely for use in future development of devices which
may be subject to FCC regulation, or other authorities governing radio emission. This Kit may not
be resold by users for any purpose. Accordingly, operation of the Kit in the development of future
devices is deemed within the discretion of the user and the user shall have all responsibility for
any compliance with any FCC regulation or other authority governing radio emission of such
development or use, including without limitation reducing electrical interference to legally
acceptable levels. All products developed by user must be approved by the FCC or other authority
governing radio emission prior to marketing or sale of such products and user bears all
responsibility for obtaining the FCC’s prior approval, or approval as needed from any other
authority governing radio emission.
If user has obtained the Kit for any purpose not identified above, including all conditions of
assembly and use, user should return Kit to RF Monolithics, Inc. immediately.
The Kit is an experimental device, and RFM makes no representation with respect to the
adequacy of the Kit in developing low-power wireless data communications applications or
systems, nor for the adequacy of such design or result. RFM does not and cannot warrant that the
functioning of the Kit will be uninterrupted or error-free.
The Kit and products based on the technology in the Kit operate on shared radio channels. Radio
interference can occur in any place at any time, and thus the communications link may not be
absolutely reliable. Products using Virtual Wire® technology must be designed so that a loss of
communications due to radio interference or otherwise will not endanger either people or property,
and will not cause the loss of valuable data. RFM assumes no liability for the performance of
products which are designed or created using the Kit. RFM products are not suitable for use in
life-support applications, biological hazard applications, nuclear control applications, or
radioactive areas.
RFM and Virtual Wire are registered trademarks of RF Monolithics, Inc. MS-DOS, QuickBASIC,
and Windows are registered trademarks of Microsoft Corporation.
3