MF-SMHT160-2 Bourns Inc., MF-SMHT160-2 Datasheet - Page 3

• Manufacturer Part Number: MF-SMHT160-2
• Description: FUSE PTC RESETTABLE
• Manufacturer: Bourns Inc.
• Series: MF-SMHTr
• Type: PTC Resettable Fusesr

Specifications of MF-SMHT160-2

• Voltage - Max: 16V
• Current - Max: 100A
• Current - Hold (ih) (max): 1.6A
• Current - Trip (it): 3.2A
• R Min/max: 0.050 ~ 0.150 Ohm
• Time To Trip: 10s
• Package / Case: Non-Standard SMD
• Hold Current: 1.6 Amps
• Trip Current: 3.2 Amps
• Current Rating (max): 100 Amps
• Resistance: 0.15 Ohms
• Maximum Voltage: 16 VoltsDC
• Termination Style: SMD/SMT
• Mounting Style: SMD/SMT
• Current Rating: 100 Amps
• Dimensions: 9.5 mm L x 6.71 mm W x 3 mm H
• Operating Temperature Range: - 40 C to + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

The Time to Trip curves represent typical performance of a device in a simulated application environment. Actual performance in specifi c customer
applications may differ from these values due to the infl uence of other variables.
MF-SMHT SERIES, REV. E, 11/10
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
Typical Time to Trip at 23 ˚C
Solder Refl ow Recommendations
MF-SMHT Series - PTC Resettable Fuses
300
250
200
150
100
50
0
Preheating
160–220
0.001
0.01
0.1
10
1
1
Time (seconds)
Soldering
10–20
Cooling
Fault Current (Amps)
MF-SMHT136
120
10
MF-SMHT160
Solder refl ow
•
•
•
•
•
Note:
•
Rework
•
Recommended refl ow methods: IR, vapor phase oven, hot air oven.
Devices are not designed to be wave soldered to the bottom side of
the board.
Gluing the devices is not recommended.
Recommended maximum paste thickness is 0.25 mm (.010 inch).
Devices can be cleaned using standard industry methods and
solvents.
If refl ow temperatures exceed the recommended profi le, devices
may not meet the performance requirements.
A device should not be reworked.
100