2832632 Phoenix Contact, 2832632 Datasheet - Page 4

• Manufacturer Part Number: 2832632
• Description: ETHERNET SWITCH 8 PORT RJ45
• Manufacturer: Phoenix Contact
• Type: Ethernetr

Specifications of 2832632

• Features: 8 Ports
• Product: Switches
• Usoc Codes: RJ45
• Mounting Style: DIN Rail
• Number Of Ports: 8
• Gender: Female
• Shielding: Unshielded
• Contact Type: RJ45
• Number Of Rows: 2
• Operating Temperature Range: - 40 C to + 70 C
• Current, Consumption: 250 mA
• Phoenix Part Number: FL SWITCH LM 8TX
• Power Consumption: 6 W
• Voltage, Ripple: 3.6 Vpp
• Voltage, Supply: 24 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FL SWITCH LM 8TX

General Information
Installation and Mounting/Removal
Install the lean managed switch on a clean DIN rail according to EN 60715. To avoid contact resistance only use clean,
corrosion-free DIN rails. End clamps can be mounted on both sides of the module to stop the modules from slipping on the
DIN rail.
Mounting
1
2
3
Removal
1
2
3
7199_en_01
Conformance With EMC Directives
Developed according to IEC 61000-6.2
Emitted interference acc. to EN55022: 1998
+ A1: 2000 + A2: 2003 (interference voltage)
Emitted interference acc. to EN55011: 1998
+ A1: 1999 + A2: 2002 (electromagnetic interference)
Noise immunity acc. to EN61000-4-2 (IEC1000-4-2) (ESD)
Noise immunity acc. to EN61000-4-3 (IEC1000-4-3) (electromagnetic fields) Requirements acc. to DIN EN 61000-6-2
Noise immunity acc. to EN61000-4-4 (IEC1000-4-4) (burst)
Noise immunity acc. to EN61000-4-5 (IEC1000-4-5) (surge)
Noise immunity acc. to EN61000-4-6 (IEC1000-4-6) (conducted)
Contact discharge:
Air discharge:
Indirect discharge:
Data lines:
Voltage supply:
Data lines:
Voltage supply:
Place the module onto the DIN rail from above. The upper holding keyway of the module must be hooked onto the top
edge of the DIN rail.
Push the module from the front towards the mounting surface.
Once the module has been snapped on properly, check that it is fixed securely on the DIN rail.
Pull the locking latch down using a screwdriver, needle-nose pliers or similar.
Pull the bottom edge of the module away from the mounting surface.
Pull the module diagonally upwards away from the DIN rail.
Warning
Disregarding this warning may result in damage to equipment and/or serious personal injury. Only qualified
personnel may start up and operate this device. According to the safety instructions in this text, qualified
personnel are persons who are authorized to start up, to ground, and to mark devices, systems, and
equipment according to the standards of safety technology. In addition, these persons must be familiar with
all warning instructions and maintenance measures in this text.
Warning
The FL SWITCH LM ... module is designed exclusively for SELV operation according to IEC 950/EN 60950/
VDE 0805.
Class A (industrial applications)
Class A (industrial applications)
Requirements acc. to DIN EN 61000-6-2
Requirements acc. to DIN EN 61000-6-2
Requirements acc. to DIN EN 61000-6-2
Requirements acc. to DIN EN 61000-6-2
Test intensity 2, criterion B
Test intensity 3, criterion B
Test intensity 2, criterion B
Test intensity 3, criterion A
Test intensity 2, criterion B
Test intensity 3, criterion B
Test intensity 2, criterion B
Test intensity 1, criterion B
Test intensity 3, criterion A
PHOENIX CONTACT
FL SWITCH LM ...
4