SMD Inductors(Coils)
For Power Line(Multilayer, Magnetic Shielded)
MLZ Series MLZ2012
The MLZ Series is a line of multilayer choke coils for decoupling
power circuits.
The MLZ2012-W Series, a line of the MLZ Series, has increased
its DC superimposition characteristics by up to 250%
with existing products through the use of TDK's proprietary ferrite
material technology.
Also available is the MLZ2012-L Series. This series has lowered its
resistance by up to 50% compared with existing products through
the adoption of a new ferrite material and dense electrodes. This
series includes the E6 Series, which handles 1.0 to 15µH, hence it
is extremely useful in the power-supply design of low-voltage cir-
cuits.
FEATURES
• The W Series (IDC UP type) is a line of products that have
• The L Series (Low-resistance type) has lowered its resistance by
• The D Series (High frequency type) is a line of decoupling coil
• With its wider inductance range (0.1 to 46µH) and the addition of
APPLICATIONS
Modules such as digital cellular phone and camera module, Net-
books, note PCs, DSCs, DVCs, video games, portable memory
audio devices, navigation systems, PNDs, TVs, W-LANs, solid
state drives
SPECIFICATIONS
Operating temperature range
Storage temperature range
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
• Please contact our Sales office when your application are considered the following:
• All specifications are subject to change without notice.
250 to 260˚C
230˚C
180˚C
150˚C
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
achieved the industry's best
∗
up to 50% compared with existing products.
products for high frequencies. It can handle higher noise
frequencies.
the E6 Series, this series can satisfy a wide variety of
requirements.
According to research conducted in August 2010.
Preheating
60 to 120s
Time(s)
∗
Soldering
30 to 60s
10s max.
DC superimposition characteristics.
–55 to +125°C
[including its own temperature rise]
–55 to +125°C
Natural
cooling
∗
compared
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions L×W
(3) Management symbol
(4) Inductance value
(5) Types of characteristics
(6) Packaging style
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
• After mounting components onto the printed circuit board, do not
• The inductance value may change due to magnetic saturation if
• Do not expose the inductors to stray magnetic fields.
• Avoid static electricity discharge during handling.
• When hand soldering, apply the soldering iron to the printed cir-
MLZ
(1)
The preheating temperature should be set so that the tempera-
ture difference between the solder temperature and product
temperature does not exceed 150°C.
apply stress through board bending or mishandling.
the current exceeds the rated maximum.
cuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
2012
R10
1R0
100
D
W
L
T
2012
(2)
(3)
A
1R0 W
(4)
Thickness T(mm)
0.85
1.25
(5) (6)
T
007-01 / 20101007 / e533_mlz2012.fm
High frequency type
IDC-UP type
Low-resistance type
Taping [reel]
2.0×1.25mm
0.1µH
1.0 µH
10.0 µH
Conformity to RoHS Directive
Quantity
4000 pieces/reel
2000 pieces/reel
(1/4)