141-0407-012 Emerson Network Power, 141-0407-012 Datasheet - Page 14

• Manufacturer Part Number: 141-0407-012
• Description: CONN PLUG SMA STR CRIMP RG-58/U
• Manufacturer: Emerson Network Power
• Series: SMAr

Specifications of 141-0407-012

• Connector Style: SMA
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp and Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Threaded
• Cable Group: RG-58, 141, 303, LMR-195, Belden 7806A
• Frequency - Max: 12.4GHz
• Frequency-max: 12.4GHz
• Body Style: Straight
• Cable Type: RG 58/U, RG 141, RG 303, LMR 195, HPF 195, RF 195
• Features: Stainless Steel connector
• Frequency Range: 0 GHz to 26.5 GHz
• Housing Material: Stainless Steel
• Mounting Angle: Straight
• Rf Series: SMA
• Product: Various Connectors
• Gender: Male
• Contact Plating: Gold
• Shell Plating: Passivated Stainless Steel
• Termination Style: Crimp
• Maximum Frequency: 26.5 GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: J877

Cable Type
RG-316/U, 161, 174, 188; LMR-100
RG-316 DS, 188 DS
RG-58/U, 141, 303
RG-55/U, 142, 223, 400
RG-316/U, 161, 174, 188; LMR-100
RG-316 DS, 188 DS
RG-58/U, 141, 303
RG-55/U, 142, 223, 400
14
SMA Type Straight Plugs, Straight Jacks, and
Straight Bulkhead Jacks for Flexible Cable -
Crimp or Solder Contacts
1. Identify connector parts. (3 piece parts–except
2. Strip cable to dimensions shown. Do not nick braid or
3. Assemble contact onto cable as shown.
4. Flare braid and slide body assembly over contact and
bulkhead)
center conductor. Tin center conductor if contact will
be solder attached. Do not tin center conductor if
contact is to be crimp attached. When stripping LMR-
100 low loss cable, remove foil back to where cable
jacket is stripped. A wire stripper of correct size is
recommended for this step. Slide heat shrink (as
applicable) and crimp sleeve onto jacket of cable.
Solder Attachment: Solder contact to center
conductor through solder hole using .020 (0.51)
diameter solder. Use a minimum amount of solder for a
good joint.
Crimp Attachment: Crimp contact to center
conductor using Johnson
setting #2, with positioner 141-0000-907. Crimp
location should be centered between end of contact
and X-hole. Crimp attachment to solid center
conductor cables is not recommended.
under braid. Then seat body assembly firmly onto
contact. The cable may have to be held in a clamping
fixture. Arrange braid uniformly around crimp stem.
Slide crimp sleeve forward and crimp using
recommended crimp tool. Slide heat shrink forward
and shrink (as applicable).
Stainless Steel SMA Connectors
Part No.
141-0303-412
141-0304-412
141-0307-412
141-0308-412
141-0403-012
141-0404-012
141-0407-012
141-0408-012
®
Hand Tool 144-0000-910,
ASSEMBLY INSTRUCTIONS
Crimp Hex
.128 (3.25)
.151 (3.83)
.213 (5.41)
.213 (5.41)
.128 (3.25)
.151 (3.83)
.213 (5.41)
.213 (5.41)
Connectivity....for
Business-Critical Continuity
Inches (Millimeter)