100-4110-2 Bluetechnix, 100-4110-2 Datasheet - Page 13

no-image

100-4110-2

Manufacturer Part Number
100-4110-2
Description
COMPUTER SGL BOARD SBC-I.MX51
Manufacturer
Bluetechnix
Type
Applications Processorsr
Datasheets

Specifications of 100-4110-2

Contents
Board, Power Supply
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With/related Products
i.MX51
Other names
100-4110
100-4110
4.1.6 PWM
Two PWM outputs are available on the GPIO/Automation Extension Connector. Please note that the PWM1 is
also present on the Video Extension Connector.
4.1.7 SPI
Two Serial Peripheral Interfaces are available on the connector. The CSPI1 interface is shared with the I2C1
and provides two slave select signals, the CSPI is shared with the SD-card interface, and provides only a single
slave select signal.
4.1.8 SSI
This interface can be used as alternate digital audio channel and is connected to the AUD4 interface of the
i.MX51.
4.1.9 UART
The signals of the UART2 and UART3 are available on the extension connector for the connection of a variety
of peripheral devices.
4.1.10 Power Supplies
The GPIO / Automation Extension Connector provides seven different supply voltages. They can be used on a
custom extension board. Some supply voltages are generated by the MC13892 and can be set to different
values. They must be set and enabled first, by configuring the companion IC. The following table shows the
maximum supply current for each voltage domain.
Signal Name
P_5V0
P_VIOHI
P_SW4
P_GEN2
P_AUDIO
P_VIDEO
P_SWLED
1)
2)
3)
4.1.11 I/O Power Domains
All digital I/O pins are part of one of three power domains: P_SW4 (1.8V), P_VIOHI (2.775V) or P_GEN2 (3.15V).
The following table shows each interface with the corresponding voltage level.
Interface
1-Wire
I2C2
Keypad
SBC-i.MX51 V1.2
Be aware that this power supply is available on both extension connectors and this is the maximum current
The P_SWLED voltage drives the LEDs connected to the LED-driver pins. The output voltage will be set
It is not advisable to alter these voltages; otherwise the board may get damaged.
automatically by the MC13892. For LED connectivity see Figure 4-3.
that can be drawn altogether.
1)
1)
1)
2)
Table 4-1: Maximum power consumption for the GPIO / Automation Connector supplies
Pins
1
2
10
Hardware User Manual 
Power Domain
P_VIOHI
P_VIOHI
P_SW4
Voltage
5.0V
2.775V
1.8V
3.15V
2.3V, 2.5V, 2.775V, 3.0V
2.5V, 2.6V, 2.7V, 2.775V
4.3V to 26.5V
Description
OWIRE
I2C1.SCL, I2C1.SDA
KPP.COL[0..5], KPP.ROW[0..3]
 
Maximum Supply Current
500mA
50mA
50mA
70mA
150mA
350mA
60mA
3)
3)
3)
13 

Related parts for 100-4110-2