PS7206-1A-E3-A CEL, PS7206-1A-E3-A Datasheet - Page 10
![no-image](/images/manufacturer_photos/0/1/129/cel_sml.jpg)
PS7206-1A-E3-A
Manufacturer Part Number
PS7206-1A-E3-A
Description
SSR OCMOS FET 600MA 4-SOP TR
Manufacturer
CEL
Series
PS, OCMOSr
Datasheet
1.PS7206-1A-A.pdf
(13 pages)
Specifications of PS7206-1A-E3-A
Circuit
SPST-NO (1 Form A)
Output Type
AC, DC
On-state Resistance
800 mOhm
Load Current
600mA
Voltage - Input
1.2VDC
Voltage - Load
0 ~ 60 V
Mounting Type
Surface Mount
Termination Style
Gull Wing
Package / Case
4-SOP
Load Voltage Rating
60 V
Load Current Rating
600 mA
Contact Form
Single Channel Form A (NO)
Output Device
MOSFET
Relay Type
Solid State
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
(2) Wave soldering
(3) Soldering by soldering iron
(4) Cautions
10
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Peak temperature (lead part temperature)
• Time (each pins)
• Flux
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
120°C
(preheating)
120±30 s
Data Sheet PN10297EJ03V0DS
350°C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
180°C
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Time (s)
(heating)
to 60 s
to 10 s
260°C MAX.
220°C
PS7206-1A