31-4803 AMPHENOL RF, 31-4803 Datasheet - Page 4

• Manufacturer Part Number: 31-4803
• Description: BNC ADAPTER BULKHEAD ISO
• Manufacturer: AMPHENOL RF
• Type: Jack-Jackr

Specifications of 31-4803

• Adapter Type: Jack to Jack
• Adapter Series: BNC to BNC
• Center Gender: Female to Female
• Convert From (adapter End): BNC Jack, Female Socket
• Convert To (adapter End): BNC Jack, Female Socket
• Conversion Type: Same Series
• Impedance: 50 Ohm
• Style: Straight
• Mounting Type: Panel Mount
• Features: Bulkhead, Isolated
• Connector Type: Intra Series Coaxial
• Body Style: Straight Bulkhead Adapter
• Convert From Connector: BNC Coaxial
• Convert From Gender: Jack
• Convert To Connector: BNC Coaxial
• Convert To Gender: Jack
• Angle: Straight
• Application: Commercial
• Finish, Housing: Nickel
• Material, Dielectric: TFE/Styrene
• Material, Housing: Brass
• Mating Type: Bayonet
• Primary Type: BNC
• Special Features: Isolated
• Voltage, Rating: 500 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 031-4803; ARF1073

Note: These characteristics are typical but may not apply to all connectors.
Reverse Polarity BNC Specifications
Note: These characteristics are typical but may not apply to all connectors.
Female Contact
Crimp Ferrule
Contact Plating
Insulator
Other Metal Parts Plating
Environmental
Temperature Range
Weatherproof
Hermetic Seals
Shock
Vibration
Moisture Resistance
Corrosion
Temperature Cycling
Altitude
Electrical
Impedance
Frequency Range
Voltage Rating
Dielectric Withstanding Voltage
VSWR
Insertion Loss
Insulation Resistance
Mechanical
Mating
Braid/Jacket Cable Affixment
Center Conductor Cable Affixment
Captivated Contact
Cable Retention
Material
Male Center Contact
Female Center Contact
Other Metal Parts
Insulators
Weatherproof Gaskets
Environmental
Temperature Range
Weatherproof
Corrosion
50
0-4 GHz
500 volts peak
1,500 volts rms
M39012 straight connectors: 1.3 max @ 0-4 GHz
M39012 right angle connectors: 1.35 max @ 0-4 GHz
0.18 dB @ 9 GHz
> 5,000 M
Bayonet coupling
Hex crimp
Hex crimp or solder
Except as noted
20-100 lbs depending on cable
Brass, gold plated
Beryllium copper or phosphorous bronze, gold plated
Brass with bright nickel finish
TFE
Silicone rubber
- 65°C to + 165 °C
When mated with other Amphenol RP-BNC connectors
MIL-STD-202, method 101, test condition B
Beryllium copper or phosphorous bronze
Copper alloy
Gold
TFE, copolymer of styrene, glass-TFE (hermetically sealed)
Nickel
TFE insulators: - 65°C to + 165 °C
Copolymer of Styrene: - 55°C to + 85°C
Clamps with clamp gaskets; crimps with heat-shrink tubing
Pass helium leak test of 2x10
MIL-STD-202 method 202
MIL-STD-202 method 204, test condition D
MIL-STD-202 method 106
MIL-STD-202 method 101, test condition B
MIL-STD-202 method 102, test condition D
MIL-STD-202 method 105, test condition C
10-8
cc/second