EVAL_PAN1321 Panasonic - ECG, EVAL_PAN1321 Datasheet - Page 19

• Manufacturer Part Number: EVAL_PAN1321
• Description: EVAL KIT FOR PAN1321 INFINEON
• Manufacturer: Panasonic - ECG
• Series: PAN1321r
• Type: Transceiver, Bluetooth 2.0+EDRr

Specifications of EVAL_PAN1321

• Frequency: 2.4GHz
• For Use With/related Products: PAN1321
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: P14518

5.2.2
5.2.2.1
PAN1321-SPP supports received signal strength measurements and uses LMP signaling to keep the output
power of a remote device within the golden receive power range. The range is set with the BD_DATA parameters
RSSI_Min and RSSI_Max.
5.2.2.2
PAN1321-SPP supports power control according to the Bluetooth 2.0+EDR specification.
•
•
•
The power step configuration is set through BD_DATA parameters.
The Inquiry output power can be programmed with the Write Inquiry Transmit Power Level command introduced
in the 2.0 Bluetooth Core specification.
5.2.2.3
For high security devices the output power can be reduced to a value that reduces the communication range to a
few inches. This mode is enabled with the HCI+ command Infineon_TX_Power_Config.
Hardware Description
User’s Manual
The output power can be controlled in up to 4 configurable steps. PAN1321-SPP can work as a class 2 or 3
device, depending on the settings.
Fine tuning can be used on the power steps.
A default sub-state power step can be set
RSSI and Output Power Control
Received Signal Strength Indication (RSSI)
Output Power Control
Ultra Low Transmit Power
19
Revision 3.1, 2011-01-18
Bluetooth Capabilities
ENW89811K4CF
PAN1321-SPP