CCBRPG00 Red Lion Controls, CCBRPG00 Datasheet
CCBRPG00
Manufacturer Part Number
CCBRPG00
Description
CIRCULAR CONNECTOR, PLUG, 7POS
Manufacturer
Red Lion Controls
Datasheet
1.CCBRPG00.pdf
(2 pages)
Specifications of CCBRPG00
Gender
Plug
Contact Gender
Pin
No. Of Contacts
7
Connector Type
7-Pin
For Use With
ZDH And ZNH Series Rotary Pulse Generators
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
Open Collector Output Wiring
collector output brings the uncommitted collector of the encoder switching
device to the external world. Because the collector element is not associated
with the sensor supply voltage, the sensor output collector may be “pulled up”
to external voltages different than the encoder supply voltage (40 VDC
maximum). NPN open collector outputs are current sinking devices. An
output signal will not be generated unless a pull-up resistor is connected from
the open-collector to the positive side of an external supply. The same supply
can be used for powering the unit and for the pull-up resistor.
REPLACEMENT
Note: The RPGD connections are made by a 24 inch cable. The ZDH uses a
MODEL ZDH - 2" FLANGE MOUNT ROTARY PULSE GENERATOR
MODEL ZNH - 2.5" FLANGE MOUNT ROTARY PULSE GENERATOR
GENERAL DESCRIPTION
reliable, yet compact encoders designed for harsh factory and plant floor
environments. Both models are flange mount and conform to NEMA 4, 13
and IP66 standards. Typical applications include motion control feedback,
machine control, process control, elevator controls, conveyors, textile
equipment, robotics and food processing.
4X 90°
DIMENSIONS In inches (mm)
ZDH
The ZDH and ZNH series of sensors have open collector outputs. An open
7-Pin MS connector.
The ZDH and ZNH series of sensors are heavy duty, extremely rugged,
0.25 (6.35) DEEP
6-32 UNC-2B
(52.32)
∅
2.06
2.00 (50.8) B.C.
(44.45)
1.75
(REPLACES THE MODEL RPGD AND RPGN RESPECTIVELY)
(52.32)
(35.92)
1.414
2.06
0.625 (15.875)
0.75 (19.05)
(Ø31.72
0.3748
Ø1.249
4X 90° ∅2.475 (62.87) B.C.
(9.52
(1.27)
∅0.156 (3.96) THRU
0.05
+0.000
-0.010
+0.0000
-0.0004
+.000
-.0508
0.12 (3.05)
+.000
-.002
)
)
(50.8)
2.00
(7.62)
0.30
(50.8)
Ø2.00
(12.7)
0.50
1
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
10. RISE TIME: Less than 1 microsecond
11. ACCURACY:
MECHANICAL SPECIFICATIONS
1. SUPPLY VOLTAGE: 4.75 to 28 VDC, 100 mA max. with no output load
2. OUTPUTS: NPN Open Collector Transistor, V
3. MAX. FREQUENCY: Up to 1 MHz
4. INDEX: NPN Open Collector Transistor, V
5. INPUT RIPPLE: 100 mV peak to peak at 0 to 100 KHz.
6. NOISE IMMUNITY: Tested to BS EN61000-4-2; IEC801-3;
7. SYMMETRY:
8. QUAD PHASING:
9. MIN EDGE SEP:
1. MAXIMUM MECHANICAL SPEED: 8000 RPM
2. SHAFT DIAMETER:
3. RADIAL SHAFT LOAD: 80 lbs. max. Rated load of 20 to 40 lbs. for
4. AXIAL SHAFT LOAD: 80 lbs. max. Rated load of 20 to 40 lbs. for
5. STARTING TORQUE: 3.0 oz-in. (21.18 N-mm)
(63.5)
DIMENSIONS In inches (mm)
2.50
ZNH
mA max. current. incremental - two square waves in quadrature with A
leading B for clockwise shaft rotation.
max. current. Once per revolution centered over Output Channel A. Index
is a positive pulse.
1 to 6000 CPR: 180° (±18°) electrical at 100 KHz output
6001 to 20,480 CPR: 180° (±36°) electrical
1 to 6000 CPR: 90° (±22.5°) electrical
6001 to 20,480 CPR: 90° (±36°) electrical
1 to 6000 CPR: 67.5° electrical at 100 KHz output
6001 to 20,480 CPR: 54° electrical
>20,480 CPR: 50° electrical
Instrument and Quadrature Error: From one cycle to any other cycle.
Interpolation error (units >3000 CPR only) within 0.005° mechanical.
bearing life of 1.5 X 10
bearing life of 1.5 X 10
BS EN61000-4-4; DDENV 50141; DDENV 50204; BS EN55022;
BS EN61000-6-2; BS EN50081-2
ZDH: 0.375" (9.5 mm)
ZNH: 0.375" (9.5 mm)
200 to 1999 CPR: 0.017° mechanical (1.0 arc minutes)
2000 to 3000 CPR: 0.01° mechanical (0.6 arc minutes)
(Total Optical Encoder Error = Instrument + Quadrature + Interpolation)
1.032
(26.2)
(∅31.72
∅1.249
+0.000
-0.0508
+0.000
-0.002
(26.2)
1.032
9
9
revolutions.
revolutions.
∅
4x 90°
0.218 (55.37) THRU
)
(Ø0.635)
Ø0.025
(19.05)
Ø0.3748
(Ø9.52
0.75
∅
0.25 (6.35)
0.12 (3.05)
2.92 (74.17) B.C.
+0.0000
-0.01016
+0.0000
-0.0004
(29.845)
1.175
)
OH
= 40 VDC max.; 100 mA
OH
(50.8)
Bulletin No. ZDH/ZNH-C
Drawing No. LP0732
Released 10/09
2.00
= 40 VDC max.; 100
0.60 (15.24)
(Ø50.8)
Ø2.00
Related parts for CCBRPG00
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Standard Circular Connectors 1/4 CABLE CLAMP
Manufacturer:
Unspecified
Part Number:
Description:
Counter
Manufacturer:
Red Lion Controls
Datasheet:
Part Number:
Description:
Miniature Length Sensor
Manufacturer:
Red Lion Controls
Datasheet:
Part Number:
Description:
Model Lsc - Single Channel Output Length Sensor
Manufacturer:
Red Lion Controls
Datasheet:
CCBRPG00 Summary of contents
Page 1
Tel +1 (717) 767-6511 Fax +1 (717) 764-0839 www.redlion.net MODEL ZDH - 2" FLANGE MOUNT ROTARY PULSE GENERATOR MODEL ZNH - 2.5" FLANGE MOUNT ROTARY PULSE GENERATOR (REPLACES THE MODEL RPGD AND RPGN RESPECTIVELY) GENERAL DESCRIPTION The ZDH and ZNH ...
Page 2
... Building 13, No.99 Tianzhou Road ShangHai, P.R. China 200223 PART NUMBER 2.5" Flange Mount ZNH0060H ZNH0100H ZNH0500H ZNH0600H ZNH1000H ZNH1200H ZNH2000H ZNH2500H PART NUMBER CCBRPG00 CCBRPG02 CCBRPG03 RPGFC002 RPGFC003 RPGFC004 RPGFC006 Red Lion Controls China Unit 101, XinAn Plaza Tel +86 21 6113-3688 Fax +86 21 6113-3683 ...