15-92-1080 Molex Inc, 15-92-1080 Datasheet - Page 8

• Manufacturer Part Number: 15-92-1080
• Description: CONN RECEPT VERTICAL 80POS .050
• Manufacturer: Molex Inc
• Series: EBBI™ 71660r

Specifications of 15-92-1080

• Number Of Rows: 2
• Connector Style: Outer Shroud Contacts
• Connector Type: Receptacle
• Number Of Positions: 80
• Mounting Type: Through Hole
• Termination: Solder
• Features: Board Lock
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Product Type: Receptacles
• Mounting Style: Through Hole
• Mounting Angle: Vertical
• Number Of Positions / Contacts: 80
• Housing Material: Thermoplastic, High Temperature
• Contact Material: Phosphor Bronze
• Contact Plating: Gold
• Voltage Rating: 30 V
• Current Rating: 1 A
• Pitch: 1.27 mm
• Pitch Spacing: 1.27mm
• No. Of Rows: 2
• No. Of Contacts: 80
• Gender: Receptacle
• Contact Termination: Through Hole Vertical
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 0015-92-1080; 0015-92-1080-E; 0015921080; 0015921080-E; 15-92-1080-E; 15921080; 15921080-E; SDA-71660-1080

7.0
DOCUMENT NO.
BORDER TEMPLATE: ES-40000-3996 REV. A SHEET 3 95/MAR/10
ENVIRONMENTAL PERFORMANCE
Mate/Unmate
Cycling
Thermal Aging
Vibration
Mechanical Shock
Thermal Shock
Steady State
Humidity
REV
H
TEST
PS - 71660
REVISE ON PC ONLY
DESCRIPTION
SEE SHEET 1
2000 Mate/Unmate
cycles followed by
thermal shock,
thermal aging, and
cyclic humidity
MIL-STD-202,
Method 108A,
Condition A
MIL-STD-202,
Method 201A
MIL-STD-202
Method 213B,
Condition A
MIL-STD-202
Method 103B,
Condition B
PRODUCT SPECIFICATION
PROCEDURE
TITLE
MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO
Mate/Unmate forces and
Contact Resistance measured
initially; measurements taken
at 250 cycle intervals: 10 mΩ
change from initial
Appearance: No physical
damage. Contact resistance:
10 mΩ change from initial.
Appearance: No physical
damage. Contact resistance:
10 mΩ change from initial
Discontinuity: 1 msecond
maximum.
Appearance: No physical
damage. Contact resistance:
10 mΩ change from initial.
Discontinuity: 1 msecond
maximum
Appearance: No physical
damage. Contact resistance:
10 mΩ change from initial
Appearance: No physical
damage. Contact resistance:
10 mΩ change from initial
Insulation Resistance: 100
mΩ min. Must pass dielectric
strength
PRODUCT SPECIFICATION FOR
RECEPTACLE CONNECTORS
CRITERIA
EBBI 50D PLUG AND
EC U5-0926
Mate/unmate connectors
for 2000 cycles at a rate of
10 cycles per minute
Mated connectors
subjected to 105 °C for 96
hours.
Mated connectors to be
soldered to a PCB with a
simple harmonic motion
along the X, Y and Z axes,
having an amplitude of
.059” (1.5 mm) P-P. Each
axis shall be subjected to
the entire range of 10-55-
10 Hz, traversed in one
minute, Duration: 2 hours
for each axis.
Mated connectors to be
soldered to a PCB with 50
grams of acceleration. 3
shocks along the X, Y and
Z axes.
Mated connectors
subjected to 105 °C to -40
°C with 30 minute dwell,
Mated connectors
subjected to 60± 2 °C at
90-95% RH for 96 hours.
COMMENTS
FILE NAME
PS71660
DCBRD03.LWP
LANGUAGE
ENGLISH
SHEET
8