62GB-585-08-33S Amphenol, 62GB-585-08-33S Datasheet - Page 3
![STRAIN RELIEF, 62GB, SOCKET, 3WAY](/photos/18/91/189153/42265906_sml.jpg)
62GB-585-08-33S
Manufacturer Part Number
62GB-585-08-33S
Description
STRAIN RELIEF, 62GB, SOCKET, 3WAY
Manufacturer
Amphenol
Datasheet
1.62GB-812-10.pdf
(22 pages)
Specifications of 62GB-585-08-33S
Connector Type
Clamp / Strain Relief
Connector Shell Size
8
Strain Relief Material
Aluminium
Svhc
No SVHC (15-Dec-2010)
Colour
Black
Connector
RoHS Compliant
Accessory Type
Grommet And Nut With Strain Relief Clamp
Rohs Compliant
No
For Use With
Miniature Bayonet Lock Connectors
designers important features not found in any other range
of connectors. The range has full qualification approval to
British Standards Specification BS 9522 FOO 17 and British
Defence Specification DEF STAN 59-35 (Part 3) Sec. 7.
This catalogue to be used in conjunction with Catalogues:
CE-2Pa – 62GB Series Plugs
CE-2Ra – 62GB Series Receptacles
entirely in the United Kingdom by Amphenol Limited. They
are the first and only British connectors to have achieved
this. A doubly strong position which Amphenol are well
geared to handle. The manufacturing facilities of the
Whitstable plant have been cited as exemplary in Europe.
Certainly the layout is extensive and extremely efficient;
safety awards have been attained every time returns have
been submitted to the British Safety Council.
Government authorities on an international scale and users
can be found in Sweden, Denmark, Norway, Finland,
Germany, Spain, Holland, India, Canada and Italy.
Connectors must be derated under the following
operating conditions:
2.
3.
Derating
1.
British Standards Specification BS 9522 FOO 17
closely corresponds to the United States Military
Specification MIL-C-26482 solder terminations.
Certain differences exist between the schedules which
can be seen on pages 2 and 3.
Approved gauges are used to check interchangeability
of 62GB series with other connectors manufactured to
BS 9522 FOO 17 or MIL-C-26482.
Military Specifications
This miniature bayonet lock connector series offers
62GB Series connectors - developed and manufactured
62GB Series connectors have been well established with
Amphenol 62GB connectors are designed to meet
the most stringent requirements of both
specifications.
At high altitudes, revised voltage ratings become
effective as shown on page 7.
When connectors to different specifications are
intermated (e.g. BS 9522 FOO 17 and
MIL-C26482), the combination must not be
operated under conditions more severe than the
less stringent clause of either specification.
At elevated ambient temperatures, the current ratings
are reduced so that total maximum hot spot
temperature of 125°C is not exceeded.
Amphenol ® 62GB
solder connectors
Connector shells are machined from solid aluminium bar
stock - not forged or extruded as in competitive designs.
Machining has inherent advantages in terms of strength
and adaptability. 62GB Series can be supplied in brass or
stainless steel, for instance.
The normal shell finish used, which has a high resistance to
corrosion, is zinc cobalt olive drab. Other finishes may be
supplied to special order, such as cadmium plate which is
available by adding deviation (714) to the end of part
number.
*
Basic Construction
Inserts are of polychloroprene rubber compounded to an
Amphenol specification. Operating temperature range is
-55°C to 125°C, and the connectors have gold-plated
contacts designed for soldered connections. Configurations
for size 20 contacts range between 2 contacts in the size 8
12.7mm (0.5in diameter) shell up to a maximum of 61
contacts in the size 2436.1 mm (1.5in diameter) shell.
Intermediate sizes, and contact data for heavier current
ratings are shown in the insert availability chart on page 6
and 7.
Hermetic connectors with glass sealed dialectric are
manufactured with mild steel shells and nickel iron
contacts plated tin over copper.
Protection Against Mis-Mating or Cross-Plugging
In BS 9522 FOO 17 positive shell-to-shell keying is
provided with keys and keyways in a choice of either the
normal (N) or any of the four preferred alternate
positions: B, C, E and F. This prevents mismating between
shells of different orientations and overcomes the
difficulties associated with rotated inserts and a standard
key-keyway orientation. In the latter system, damage to
the inserts or contacts can result if excessive force is used
to engage non-mating pairs.
Rotated inserts are, however, permissible in BS 9522 FOO
17 connectors if required to mate with or replace units to
MIL-C-26482 mounted in existing equipment. Connectors
have normal orientations manufactured to BS 9522 FOO 17
or MIL-C-26482 are fully intermateable as also are
connectors with inserts in positions W, X, Y or Z.
Other finishes are available on request.
3