DSPIC33FJ32MC204-E/PT Microchip Technology, DSPIC33FJ32MC204-E/PT Datasheet - Page 151

• Manufacturer Part Number: DSPIC33FJ32MC204-E/PT
• Description: IC, DSC, 16BIT, 32KB 40MHZ, 3.6V, TQFP44
• Manufacturer: Microchip Technology
• Series: DsPIC33Fr

Specifications of DSPIC33FJ32MC204-E/PT

• Core Frequency: 40MHz
• Core Supply Voltage: 3.6V
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 35
• Flash Memory Size: 32KB
• Supply Voltage Range: 3V To 3.6V
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 9x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 44-TQFP, 44-VQFP
• Package: 44TQFP
• Device Core: dsPIC
• Family Name: dSPIC33
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 35
• Interface Type: I2C/SPI/UART
• On-chip Adc: 9-chx10-bit|9-chx12-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

REGISTER 12-2:
© 2011 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12-7
bit 6
bit 5-4
bit 3-2
bit 1
bit 0
Note 1:
TON
R/W-0
U-0
—
2:
(2)
When 32-bit timer operation is enabled (T32 = 1) in the Timer Control register (T2CON<3>), the TSIDL bit
must be cleared to operate the 32-bit timer in Idle mode.
When the 32-bit timer operation is enabled (T32 = 1) in the Timer Control register (T2CON<3>), these bits
have no effect.
dsPIC33FJ32MC202/204 and dsPIC33FJ16MC304
TON: Timer3 On bit
1 = Starts 16-bit Timer3
0 = Stops 16-bit Timer3
Unimplemented: Read as ‘0’
TSIDL: Stop in Idle Mode bit
1 = Discontinue timer operation when device enters Idle mode
0 = Continue timer operation in Idle mode
Unimplemented: Read as ‘0’
TGATE: Timer3 Gated Time Accumulation Enable bit
When TCS = 1:
This bit is ignored.
When TCS = 0:
1 = Gated time accumulation enabled
0 = Gated time accumulation disabled
TCKPS<1:0>: Timer3 Input Clock Prescale Select bits
11 = 1:256 prescale value
10 = 1:64 prescale value
01 = 1:8 prescale value
00 = 1:1 prescale value
Unimplemented: Read as ‘0’
TCS: Timer3 Clock Source Select bit
1 = External clock from T3CK pin
0 = Internal clock (F
Unimplemented: Read as ‘0’
TGATE
R/W-0
U-0
—
T3CON CONTROL REGISTER
(2)
‘1’ = Bit is set
W = Writable bit
TSIDL
R/W-0
R/W-0
(2)
OSC
TCKPS<1:0>
(1)
/2)
(1)
R/W-0
U-0
(2)
—
(2)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U-0
U-0
—
—
(2)
(2)
U-0
U-0
—
—
x = Bit is unknown
TCS
R/W-0
U-0
—
(2)
DS70283H-page 151
U-0
U-0
—
—
bit 8
bit 0