S29AL008J70TFI010 Spansion Inc., S29AL008J70TFI010 Datasheet - Page 39

• Manufacturer Part Number: S29AL008J70TFI010
• Description: IC, FLASH, 8MBIT, 70NS, TSOP-48
• Manufacturer: Spansion Inc.

Specifications of S29AL008J70TFI010

• Memory Type: Flash
• Memory Size: 8Mbit
• Memory Configuration: 1M X 8 / 512K X 16
• Ic Interface Type: CFI, Parallel
• Access Time: 70ns
• Supply Voltage Range: 2.7 To 3.6 V
• Memory Case Style: TSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

12. Absolute Maximum Ratings
13. Operating Ranges
February 23, 2010 S29AL008J_00_09
Notes
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may overshoot V
2. Minimum DC input voltage on pins A9, OE#, and RESET# is -0.5 V. During voltage transitions, A9, OE#, and RESET# may overshoot V
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
4. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only;
Note
Operating ranges define those limits between which the functionality of the device is guaranteed.
Parameter
Storage Temperature Plastic Packages
Ambient Temperature with Power Applied
Voltage with Respect to Ground
Output Short Circuit Current
Parameter
Ambient Temperature
V
CC
up to 20 ns. See
pins may overshoot to V
to –2.0 V for periods of up to 20 ns. See
14.0 V for periods up to 20 ns.
functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is
not implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
V
A9, OE#, and RESET#
All other pins
CC
Supply Voltages
(Note 1)
(Note 1)
Figure 13.1 on page
(Note 2)
CC
(Note 3)
+2.0 V for periods up to 20 ns. See
D a t a
+2.0 V
+0.5 V
+0.8 V
–0.5 V
–2.0 V
2.0 V
Figure 13.1 Maximum Negative Overshoot Waveform
Figure 13.2 Maximum Positive Overshoot Waveform
V
V
CC
CC
39. Maximum DC voltage on input or I/O pins is
Figure 13.1 on page
S h e e t
S29AL008J
20 ns
20 ns
39. Maximum DC input voltage on pin A9 is +12.5 V which may overshoot to
Figure 13.2 on page
Extended (N) Devices
Industrial (I) Devices
20 ns
20 ns
Regulated
Full
20 ns
39.
V
CC
+0.5 V. During voltage transitions, input or I/O
–0.5 V to V
–65° C to +150° C
–65° C to +125° C
–0.5 V to +12.5 V
–0.5 V to +4.0 V
200 mA
Rating
CC
–40°C to +125°C
–40° C to +85° C
+0.5 V
3.0 V to 3.6 V
2.7 V to 3.6 V
SS
Range
to –2.0 V for periods of
39
SS