S29AL032D70TFI030 Spansion Inc., S29AL032D70TFI030 Datasheet - Page 47

• Manufacturer Part Number: S29AL032D70TFI030
• Description: IC, FLASH, 32MBIT, 70NS, TSOP-48
• Manufacturer: Spansion Inc.

Specifications of S29AL032D70TFI030

• Memory Type: Flash
• Memory Size: 32Mbit
• Memory Configuration: 4M X 8 / 2M X 16
• Ic Interface Type: CFI, Parallel
• Access Time: 70ns
• Supply Voltage Range: 2.7V To 3.6V
• Memory Case Style: TSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

13. Absolute Maximum Ratings
14. Operating Ranges
January 19, 2007 S29AL032D_00_A9
Notes
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may overshoot V
2. Minimum DC input voltage on pins A9, OE#, and RESET# is -0.5 V. During voltage transitions, A9, OE#, and RESET# may overshoot V
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
4. Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only;
Note
Operating ranges define those limits between which the functionality of the device is guaranteed.
Parameter
Storage Temperature, Plastic Packages
Ambient Temperature with Power Applied
Voltage with Respect to Ground
Output Short Circuit Current (Note 3)
up to 20 ns. See
pins may overshoot to V
to –2.0 V for periods of up to 20 ns. See
14.0 V for periods up to 20 ns.
functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is
not implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
Ambient Temperature (T
V
CC
Supply Voltages
Figure 13.1 on page
CC
+2.0 V for periods up to 20 ns. See
D a t a
+0.8 V
–0.5 V
–2.0 V
Figure 13.1 Maximum Negative Overshoot Waveform
A
Figure 13.2 Maximum Positive Overshoot Waveform
+2.0 V
+0.5 V
)
2.0 V
V
V
45. Maximum DC voltage on input or I/O pins is
Parameter
CC
CC
Figure 13.1 on page
Table 13.1 Absolute Maximum Ratings
S h e e t
Table 14.1 Operating Ranges
S29AL032D
V
CC
20 ns
V
A9, OE#, and RESET#
All other pins
Extended (N) Devices
for standard voltage range
Industrial (I) Devices
CC
20 ns
45. Maximum DC input voltage on pin A9 is +12.5 V which may overshoot to
(Note 1)
Figure 13.2 on page
20 ns
(Note 1)
20 ns
(Note 2)
20 ns
45.
V
CC
+0.5 V. During voltage transitions, input or I/O
–0.5 V to V
–40°C to +125°C
–40°C to +85°C
–0.5 V to +12.5 V
–65°C to +150°C
–65°C to +125°C
2.7 V to 3.6 V
–0.5 V to +4.0 V
Range
SS
200 mA
Rating
to –2.0 V for periods of
CC
+0.5 V
45
SS