PIC24HJ256GP210A-I/PF Microchip Technology, PIC24HJ256GP210A-I/PF Datasheet - Page 81

• Manufacturer Part Number: PIC24HJ256GP210A-I/PF
• Description: IC, 16BIT MCU, PIC24H, 40MIPS, TQFP-100
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ256GP210A-I/PF

• Controller Family/series: PIC24
• Ram Memory Size: 16KB
• Cpu Speed: 40MIPS
• No. Of Timers: 9
• Interface: I2C, LIN, SPI, UART
• No. Of Pwm Channels: 8
• Core Size: 16 Bit
• Program Memory Size: 256 KB
• Core Processor: PIC
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 32x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Embedded Interface Type: I2C, LIN, SPI, UART
• Rohs Compliant: Yes
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 85
• Number Of Timers: 9
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 32 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Revision G (March 2009) (Continued)
• Removed PROGW and renamed QBLANK to
• Updated the flowchart in
• Updated the second paragraph in
• Changed the CFGB calculation for
• Removed Note 2 in
• Updated the Erased Value and Value with
• Removed COE and BKBUG Configuration Bit
• Added PLLKEN to FWDT in
• Added ALTQIO and ALTSS1 to FPOR in
© 2010 Microchip Technology Inc.
QBLANKEX in the Command Set Summary, and
added the following commands (see
- ERASEB
- ERASEP
- CRCP
“Confirming the Presence of the Programming
Executive”
dsPIC33FJ06GS101/102/202 and
dsPIC33FJ16GS402/404/502/504 devices to:
+ (FPOR & 0x0F)
0xAAAAAA at 0x0 and Last Code Address
columns in Table 3-2 for the following devices:
- dsPIC33FJ64GP202
- dsPIC33FJ64GP204
- dsPIC33FJ64GP802
- dsPIC33FJ64GP804
- dsPIC33FJ64MC202
- dsPIC33FJ64MC204
- dsPIC33FJ64MC802
- dsPIC33FJ64MC804
- PIC24HJ64GP202
- PIC24HJ64GP204
- PIC24HJ64GP502
- PIC24HJ64GP504
Descriptions in
Table 3-3
Table 3-2
and Table 3-3
Table 3-2
Section 3.6.1 “Overview”
Figure 3-2
and Table 3-3
Table 3-2
Section 3.2
Table
and
3-1):
• Removed Notes for the following Configuration Bit
• Added Note 6 and Note 7 to Table 3-3
• Added Note 1 to
• Added Note to the beginning of
• Updated the third paragraph in
• Changed the clock speed to be provided by the
• Added
• Removed FUID2 and FUID3 from
• Added new Default Configuration Register Value
• Updated description for FWDT and added Note 1
• Added seven new op code instructions to Step 3
• Updated Step 4 in
• Added new columns (Application ID and JTAG ID)
• Added JTAG Type registers (see
• The following updates were made to
Descriptions in
- RBS
- RSS (removed Note 1)
- SSS
- SWRP
- IOL1WAY
- ALTI2C
- BOREN
Programming Executive”
“Communication Interface and Protocol”
clarify the clock response time
programmer from 7.35 MHz to 1.85 MHz in
Section 4.1.2 “SPI Rate”
(formerly Figure 5-2)
table in support of dsPIC33FJ32GSX06/60X/610
and dsPIC33FJ64GSX06/60X/610 devices (see
Table
in
in
pointer increment
to
Register 7-2
- Updated parameters P1A and P1B and
- Updated characteristic for parameter P16
- Updated minimum value and units for
- Added new parameter P21
added additional characteristics and values
parameter P18
Table 5-10
Table 6-1
Table 7-1
5-9)
Figure 5-2
and
Table
Figure 3-5
Register
and updated
Table 6-1
3-2:
7-3)
to reflect the TBLPG
Section 4.1.1
Figure 5-3
Section 4.0 “The
Register
DS70152H-page 81
Table 5-6
Table 8-1
7-1,
to