MCP1727T-5002E/SN Microchip Technology, MCP1727T-5002E/SN Datasheet - Page 15
![no-image](/images/manufacturer_photos/0/4/439/microchip_technology_sml.jpg)
MCP1727T-5002E/SN
Manufacturer Part Number
MCP1727T-5002E/SN
Description
1.5A CMOS LDO, Vout=5.0V, Extended Temp Range 8 SOIC 3.90mm (.150") T/R
Manufacturer
Microchip Technology
Specifications of MCP1727T-5002E/SN
Regulator Topology
Positive Fixed
Voltage - Output
5V
Voltage - Input
Up to 6V
Voltage - Dropout (typical)
0.33V @ 1.5A
Number Of Regulators
1
Current - Output
1.5A (Min)
Operating Temperature
-40°C ~ 125°C
Mounting Type
Surface Mount
Package / Case
8-SOIC (3.9mm Width)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Current - Limit (min)
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
MCP1727T-5002E/SN
Manufacturer:
MICROCHIP
Quantity:
12 000
3.6.2
For fixed output voltage versions of the device, the
SENSE input is used to provide output voltage
feedback to the internal circuitry of the MCP1727. The
SENSE pin typically improves load regulation by
allowing the device to compensate for voltage drops
due to packaging and circuit board layout.
© 2007 Microchip Technology Inc.
Sense
3.7
The V
LDO. A minimum output capacitance of 1.0 µF is
required for LDO stability. The MCP1727 is stable with
ceramic,
capacitors. See Section 4.3 “Output Capacitor” for
output capacitor selection guidance.
3.8
The 3x3 DFN package has an exposed pad on the
bottom of the package. This pad should be soldered to
the Printed Circuit Board (PCB) to aid in the removal of
heat from the package during operation. The exposed
pad is at the ground potential of the LDO.
OUT
Regulated Output Voltage (V
Exposed Pad (EP)
pin(s) is the regulated output voltage of the
tantalum
and
MCP1727
aluminum-electrolytic
DS21999B-page 15
OUT
)