MCP6295-E/SN Microchip Technology, MCP6295-E/SN Datasheet - Page 14

• Manufacturer Part Number: MCP6295-E/SN
• Description: IC,Operational Amplifier,DUAL,CMOS,SOP,8PIN,PLASTIC
• Manufacturer: Microchip Technology

Specifications of MCP6295-E/SN

• Amplifier Type: General Purpose
• Number Of Circuits: 2
• Output Type: Rail-to-Rail
• Slew Rate: 7 V/µs
• Gain Bandwidth Product: 10MHz
• Current - Input Bias: 1pA
• Voltage - Input Offset: 3000µV
• Current - Supply: 1mA
• Current - Output / Channel: 25mA
• Voltage - Supply, Single/dual (±): 2.4 V ~ 6 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• -3db Bandwidth: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

MCP73X23EV-LFP: MCP73X23 OVP Lithium Iron Phosphate
Battery Charger Evaluation Board
The MCP73X23 Lithium Iron Phosphate Battery Charger
Evaluation Board demonstrates the features of Microchip’s
MCP73123 and MCP73223 “Lithium Iron Phosphate
(LiFePO4) Battery Charge Management Controller with
Input Overvoltage Protection”. The MCP73X23 Lithium Iron
Phosphate Battery Charger Evaluation Board is designed
with two independent circuits. The MCP73123 is designed
to charge a single-cell LiFePO4 battery, while the MCP73223
charges a dual-cell LiFePO4 battery. Both circuits offer
two different fast charging currents. The default value of
fast charging current is 500 mA and when PROG via is tie
to ground, the two parallel resistors output 1000 mA fast
charging current to a battery pack. One blue LED status
output allows user to learn if the MCP73123/223 is in
charging state or not. The MCP73X23 Lithium Iron Phosphate
Battery Charger Evaluation Board comes with installed
MCP73123 and MCP73223 devices in 3 mm x 3 mm DFN
packages. The factory preset battery regulation voltage is
3.6V for the MCP73123 and 7.2V for the MCP73223 with
10% precondition current, 10% termination current set
point, automatic recharge and 6.5V over voltage protection
threshold voltage. The MCP73X23 Lithium Iron Phosphate
Battery Charger Evaluation Board is designed to observe the
performance and features of Microchip’s MCP73123 and
MCP73223. Circuits can also be implemented into suitable
applications without extra work.
MCP7383XEV-DIBC: MCP73837/8 AC/USB Dual Input
Battery Charger Evaluation Board
The MCP73837/8 AC/USB Dual Input Battery Charger
Evaluation Board demonstrates Microchip’s stand-alone
Linear Li-Ion Battery Chargers - MCP73837 and MCP73838.
The MCP73837/8 require only minimum components to
implement a complete battery charge management circuit.
The MCP73837/8 are designed to select AC-Adapter or
USB-Port Power Source automatically where AC-Adapter
provides the charge current when both sources are present.
The MCP73837/8 AC/USB Dual Input Battery Charger
Evaluation Board comes with a 10-pin DFN MCP73837
and a 10-pin MSOP MCP73838 pre-installed. The different
packages can be easily evaluated by replacing the device, a
resistor and a LED where the patterns have been
pre-designed on the board layout.
14
Related Support Material
Battery Power Applications Design Guide
MCP73871EV: MCP73871 Evaluation Board
The MCP73871 Evaluation Board is designed to demonstrate
Microchip’s stand-alone linear Li-Ion battery charger with
system power path and load sharing management control
solution. The system load is also supported by the Li-Ion
battery when input power is disconnected. A number of
device options allow the MCP73871 device to be utilized in
a variety of applications. Refer to the MCP73871 data sheet
(DS22090).
Typical applications for the reference design are: smart
phones, PDA, portable media players, MP3 Players, digital
cameras, handheld medical devices, bluetooth headsets,
ultra-mobile PC and portable communicators.
MCP73831EV: MCP73831 Evaluation Kit
Two evaluation boards are provided in the MCP73831
Evaluation Kit. The boards are set up to evaluate simple,
stand-alone, linear charging of single cell Li-Ion/Li-Polymer
battery packs (the battery packs are not included). Each
board design provides constant current charging followed
by constant voltage charging with automatic charge
termination. In addition, the MCP73831-2AC board provides
preconditioning of deeply depleted cells. Each board design
provides evaluation of the MCP73831 in two package
options: a SOT-23-5 and a 8-pin 2x3 DFN for higher power
handling capability.
MCP7384XEV: MCP7384X Li-Ion Battery Charger
Evaluation Board
The MCP7384X Li-Ion Battery Charger Evaluation Board
features three circuits utilizing the MCP73841, MCP73842
and MCP73843 devices to demonstrate simple, stand-alone,
linear charging of single or dual cell Lithium-Ion/Lithium-
Polymer battery packs (the battery packs are not included).
Also check out the following demonstration boards:
MCP73213EV-2SOVP: MCP73213 OVP Dual Cell Li-Ion
Battery Charger Evaluation Board
MCP7383XRD-PPM: MCP7383X Li-Ion System Power Path
Management Reference Design
MCP73833EV: MCP73833 Li-Ion Battery Charger
Evaluation Board
MCP73871DM-VPCC: MCP73871 Demo Board with Voltage
Proportional Current Control