MCP73826-4.1VCHTR Microchip Technology, MCP73826-4.1VCHTR Datasheet - Page 9

• Manufacturer Part Number: MCP73826-4.1VCHTR
• Description: IC,Battery Management,CMOS,TSOP,6PIN,PLASTIC
• Manufacturer: Microchip Technology

Specifications of MCP73826-4.1VCHTR

• Function: Charge Management
• Battery Type: Lithium-Ion (Li-Ion)
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: -20°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: SOT-23-6
• Output Voltage: 4.141 V
• Operating Supply Voltage: 4.5 V to 5.5 V
• Supply Current: 560 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 20 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: MCP738264.1VCHTR

4.0
The MCP73826 is a linear charge management con-
troller. Refer to the functional block diagram on page 2
and the typical application circuit, Figure 6-1.
4.1
Upon insertion of a battery or application of an external
supply, the MCP73826 verifies the state of the SHDN
pin. The SHDN pin must be above the logic high level.
If the SHDN pin is above the logic high level, the
MCP73826 initiates a charge cycle. If the cell is below
the preconditioning threshold, 2.4V typically, the
MCP73826 preconditions the cell with a scaled back
current. The preconditioning current is set to approxi-
mately 43% of the fast charge peak current. The pre-
conditioning safely replenishes deeply depleted cells
and minimizes heat dissipation in the external pass
transistor during the initial charge cycle.
4.2
Preconditioning ends and fast charging begins when
the cell voltage exceeds the preconditioning threshold.
Fast charge utilizes a foldback current scheme based
on the voltage at the V
across an external sense resistor, R
put voltage,
voltage reaches the regulation voltage, V
2002 Microchip Technology Inc.
DEVICE OVERVIEW
Charge Qualification and
Preconditioning
Controlled Current Regulation - Fast
Charge
V
BAT
. Fast charge continues until the cell
SNS
input developed by the drop
SENSE
REG
, and the out-
.
4.3
When the cell voltage reaches the regulation voltage,
V
MCP73826 monitors the cell voltage at the
This input is tied directly to the positive terminal of the
battery. The MCP73826 is offered in two fixed-voltage
versions for battery packs with either coke or graphite
anodes:
(MCP73826-4.2).
4.4
The charge cycle can be terminated by a host micro-
controller after an elapsed time from the start of the
charge cycle. The charge is terminated by pulling the
shutdown pin, SHDN, to a logic Low level.
REG
, constant voltage regulation begins. The
Constant Voltage Regulation
Charge Cycle Completion
4.1V
(MCP73826-4.1)
MCP73826
DS21705A-page 9
and
V
BAT
4.2V
pin.