PIC18LF4580-I/ML Microchip Technology, PIC18LF4580-I/ML Datasheet - Page 10

• Manufacturer Part Number: PIC18LF4580-I/ML
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,LLCC,44PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18LF4580-I/ML

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFN
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1.5 KB
• Interface Type: SPI, I2C, EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM163011
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 11 Channel
• A/d Bit Size: 10 bit
• A/d Channels Available: 11
• Height: 0.88 mm
• Length: 8 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2 V
• Width: 8 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC18F2480/2580/4480/4580
11. Module: ECAN Technology
12. Module: 10-Bit Analog-to-Digital
DS80496C-page 10
In Listen Only mode, the module may
persistently set the IRXIF and RXB0IF interrupt
flags, and the RXFUL status flag, after receiving
129 or more consecutive error frames. In this
case, the flags can be cleared, but then will
become set again immediately and continuously
without receiving a bus message.
Work around
Place the ECAN module in Configuration mode
before receiving 129 consecutive error frames
and then place it back into Listen Only mode.
Affected Silicon Revisions
When the AD clock source is selected as 2 T
or RC (when ADCS<2:0> = 000 or x11), in
extremely rare cases, the E
Error) and E
exceed the data sheet specifications at codes,
511 and 512 only.
Work around
Select the AD clock source as 4 T
16 T
2 T
Affected Silicon Revisions
A1
A1
X
X
OSC
OSC
or RC.
B0
B0
, 32 T
Converter
DL
OSC
B2
B2
(Differential Linearity Error) may
or 64 T
OSC
IL
and avoid selecting
(Integral Linearity
OSC
, 8 T
OSC
OSC
,
13. Module: MSSP
In SPI mode, the SDO output may change after
the inactive clock edge of the Bit 0 output. This
may affect some SPI components that read data
over 300 ns after the inactive edge of SCK.
Work around
None.
Affected Silicon Revisions
A1
X
B0
B2
 2010 Microchip Technology Inc.