PIC18LF4682-I/PT Microchip Technology, PIC18LF4682-I/PT Datasheet - Page 300

• Manufacturer Part Number: PIC18LF4682-I/PT
• Description: 80KB Flash, 3KB RAM, ECAN, 1024 EEPROM 44 TQFP 10x10x1mm TRAY
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18LF4682-I/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 80KB (40K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.25K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC18F2682/2685/4682/4685
REGISTER 23-26: BnSIDL: TX/RX BUFFER n STANDARD IDENTIFIER REGISTERS,
REGISTER 23-27: BnSIDL: TX/RX BUFFER n STANDARD IDENTIFIER REGISTERS,
DS39761C-page 300
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-5
bit 4
bit 3
bit 2
bit 1-0
Note 1:
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-5
bit 4
bit 3
bit 2
bit 1-0
Note 1:
R/W-x
SID2
SID2
R-x
These registers are available in Mode 1 and 2 only.
These registers are available in Mode 1 and 2 only.
SID2:SID0: Standard Identifier bits (if EXID = 0)
Extended Identifier bits EID20:EID18 (if EXID = 1).
SRR: Substitute Remote Transmission Request bit (only when EXID = 1)
1 = Remote transmission request occurred
0 = No remote transmission request occurred
EXID: Extended Identifier Enable bit
1 = Received message is an extended identifier frame (SID10:SID0 are EID28:EID18)
0 = Received message is a standard identifier frame
Unimplemented: Read as ‘0’
EID17:EID16: Extended Identifier bits
SID2:SID0: Standard Identifier bits (if EXIDE = 0)
Extended Identifier bits EID20:EID18 (if EXIDE = 1).
Unimplemented: Read as ‘0’
EXIDE: Extended Identifier Enable bit
1 = Received message is an extended identifier frame (SID10:SID0 are EID28:EID18)
0 = Received message is a standard identifier frame
Unimplemented: Read as ‘0’
EID17:EID16: Extended Identifier bits
R/W-x
SID1
SID1
R-x
LOW BYTE IN RECEIVE MODE [0 ≤ n ≤ 5, TXnEN (BSEL0<n>) = 0]
LOW BYTE IN RECEIVE MODE [0 ≤ n ≤ 5, TXnEN (BSEL0<n>) = 1]
W = Writable bit
W = Writable bit
‘1’ = Bit is set
‘1’ = Bit is set
R/W-x
SID0
SID0
R-x
SRR
U-0
R-x
—
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
EXIDE
R/W-x
EXID
R-x
U-0
U-0
—
—
© 2009 Microchip Technology Inc.
x = Bit is unknown
x = Bit is unknown
EID17
R/W-x
EID17
R-x
(1)
(1)
EID16
R/W-x
EID16
R-x
bit 0
bit 0