H3CR-H8L AC100-120 M Omron, H3CR-H8L AC100-120 M Datasheet - Page 3
![SOLID STATE TIMER, DPDT, 12MIN, 120VAC](/photos/9/60/96098/h3cr-h8l-ac100-120m_sml.jpg)
H3CR-H8L AC100-120 M
Manufacturer Part Number
H3CR-H8L AC100-120 M
Description
SOLID STATE TIMER, DPDT, 12MIN, 120VAC
Manufacturer
Omron
Series
H3CR-Hr
Datasheet
1.Y92H-7.pdf
(23 pages)
Specifications of H3CR-H8L AC100-120 M
Contact Configuration
DPDT
Nom Input Voltage
120VAC
Delay Time Range
0.05min To 12min
Timing Adjustment
Knob
Relay Mounting
DIN Rail
Relay Type
Integrated
Function
Off-Delay
Circuit
DPDT (2 Form C)
Delay Time
0.05 Min ~ 12 Min
Output Type
Mechanical Relay
Contact Rating @ Voltage
5A @ 250VAC
Voltage - Supply
100 ~ 120VAC
Mounting Type
Socket
Termination Style
8 Pin Socketable
Timing Adjustment Method
Hand Dial
Timing Initiate Method
Input Voltage
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
H3CR-H8L-AC100-120M
H3CRH8LAC100120M
Z2386
H3CRH8LAC100120M
Z2386
■ Ratings
Note: 1. A power supply with a ripple of 20% max. (single-phase power supply with full-wave rectification) can be used with each DC Model.
■ Characteristics
Note: Refer to the Life-test Curve.
Accuracy of operating
time
Setting error
Reset time
Reset voltage
Influence of voltage
Influence of temperature ±1% FS max. (±1% FS ±10 ms max. in ranges of 1.2 and 3s)
Insulation resistance
Dielectric strength
Impulse withstand
voltage
Noise immunity
Static immunity
Vibration resistance
Shock resistance
Ambient temperature
Ambient humidity
Life expectancy
EMC
Case color
Degree of protection
Weight
Rated supply voltage (See notes 1, 2, and 3.) 100 to 240 VAC (50/60 Hz),12 VDC, 24 VAC/DC (50/60 Hz), 48 to 125 VDC
Operating voltage range
Power reset
Power consumption
Control outputs
2. Do not use an inverter output as the power supply. Refer to Safety Precautions for All Timers for details.
3. Refer to Safety Precautions for All Timers when using the Timer together with a 2-wire AC proximity sensor.
http://www.ia.omron.com/
±0.2% FS max. (±0.2% FS ±10 ms max. in ranges of 1.2 and 3 s)
±5% FS ±50 ms max.
0.1 s max.
10% max. of rated voltage
±0.2% FS max. (±0.2% FS ±10 ms max. in ranges of 1.2 and 3 s)
100 MΩ min. (at 500 VDC)
2,000 VAC, 50/60 Hz for 1 min (between current-carrying metal parts and exposed non-current-carrying metal parts)
2,000 VAC, 50/60 Hz for 1 min (between control output terminals and operating circuit)
2,000 VAC, 50/60 Hz for 1 min (between contacts of different polarities)
1,000 VAC, 50/60 Hz for 1 min (between contacts not located next to each other)
3 kV (between power terminals) for 100 to 240 VAC, 48 to 125 VDC
1 kV for 12 VDC, 24 VAC/DC
4.5 kV (between current-carrying terminal and exposed non-current-carrying metal parts) for 100 to 240 VAC, 48 to
125 VDC
1.5 kV for 12 VDC, 24 VAC/DC
±1.5 kV (between power terminals), square-wave noise by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise)
±400 V for 12 VDC
Malfunction: 8 kV
Destruction: 15 kV
Destruction: 10 to 55 Hz with 0.75-mm single amplitude for 2 hrs each in three directions
Malfunction: 10 to 55 Hz with 0.5-mm single amplitude for 10 min each in three directions
Destruction: 980 m/s
Malfunction: 98 m/s
Operating:
Storage:
Operating:
Mechanical: 20 million operations min. (under no load at 1,800 operations/h)
Electrical:
(EMI)
Emission Enclosure:
Emission AC Mains:
(EMS)
Immunity ESD:
Immunity RF-interference from AM Radio Waves:
Immunity RF-interference from Pulse-modulated Radio Waves: IEC61000-4-3: 10 V/m (900±5 MHz) (level 3)
Immunity Conducted Disturbance: IEC61000-4-6:
Immunity Burst:
Immunity Surge:
Light Gray (Munsell 5Y7/1)
IP40 (panel surface)
Approx. 100 g
100,000 operations min. (5 A at 250 VAC, resistive load at 1,800 operations/h) (See note)
−10°C to 55°C (with no icing)
−25°C to 65°C (with no icing)
35% to 85%
2
85% to 110% of rated supply voltage; 90% to 110% with 12-VDC models
Minimum power-opening time: 0.1 s
100 to 240 VAC: approx. 10 VA (2.1 W) at 240 VAC
24 VAC/VDC:
48 to 125 VDC: approx. 1.5 W at 125 VDC
12 VDC:
Contact output: 5 A at 250 VAC/30 VDC, resistive load (cosφ = 1)
2
three times each in six directions
three times each in six directions
EN61812-1
EN55011 Group 1 class A
EN55011 Group 1 class A
EN61812-1
IEC61000-4-2:
IEC61000-4-4:
IEC61000-4-5:
approx. 2 VA (1.7 W) at 24 VAC
approx. 1 W at 24 VDC
approx. 1 W at 12 VDC
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
6 kV contact discharge (level 3)
8 kV air discharge (level 3)
IEC61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3)
10 V (0.15 to 80 MHz) (level 3)
2 kV power-line (level 3)
2 kV I/O signal-line (level 4)
1 kV line to line (level 3)
2 kV line to ground (level 3)
H3CR-F
3