01-030.002 EAO, 01-030.002 Datasheet - Page 14
![Pushbutton Switch](/photos/19/43/194367/4608263_sml.jpg)
01-030.002
Manufacturer Part Number
01-030.002
Description
Pushbutton Switch
Manufacturer
EAO
Series
01r
Datasheet
1.01-040.005.pdf
(21 pages)
Specifications of 01-030.002
Leaded Process Compatible
Yes
Switch Terminals
Plug-In
Illumination
Illuminated
For Use With
01 Series Illuminated Pushbutton Switches
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Technical Data
mechanical characteristics
electrical characteristics
rules
switching element
polysulfone, heat-resistant and self-extinguishing
actuating force
3-3.5 N
actuating travel
3 mm
ambient air temperature
-25°C to +55°C
for indicators and illuminated pushbuttons mounted as a block ,
make sure the heat can escape freely
(as per DIN IEC 68-)
connection method
The universal terminals permit these units to be mounted on printed
circuit boards (PCB). These terminals can also be used as solder-
ing or plug-in terminals.
For these terminals we can also supply a plug-in base which, when
soldered on to the board, enables the switch to be plugged in.
soldering terminal:
max. wire diameter: 2 wires à 0.8 mm
max. wire cross-section of stranded cable: 1x 0.75 mm
plug-in terminal:
2.0 x 0.5 mm
degree of protection
front as per IEC 529:
IP 40
IP 67 with spray cover
mechanical life
momentary action 5 mio. cycles of operation
maintained action 1 mio. cycles of operation
rebound time
Typ. < 100 s
resistance to climate
standard condition as per IEC 68-2-3 and 2-30
changing condition as per IEC 68-2-14 and 2-33
resistance to shock
(single impacts, semi-sinusoidal)
15 g for 11 ms as per IEC 512-4-3, IEC 68-2-27
storage temperature
-40°C to + 85°C
(as per DIN IEC 68-)
electric strength
2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per IC
512-2-11.
protection class
II
switch rating
10 A/100 V to 100 mA at 42 VAC/VDC
volume resistance
starting value (initial) <= 50 m
EN 61 058
26
01.2000
2
01