61-9331.5 EAO, 61-9331.5 Datasheet - Page 8
![LENS, RECTANGULAR, GREEN](/photos/19/44/194453/4196505_sml.jpg)
61-9331.5
Manufacturer Part Number
61-9331.5
Description
LENS, RECTANGULAR, GREEN
Manufacturer
EAO
Datasheet
1.61-9311.7.pdf
(12 pages)
Specifications of 61-9331.5
Lens Color
Green
Lens Width
24mm
Lens Height
18mm
Collar Shape
Rectangular
Actuator Style
Rectangular
Color
Green
For Use With
61 Series Pushbutton Switches And Indicators
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Technical Data
Actuator with snap-action switching element
Switching system
Self-cleaning, double-break snap-action switching system with contact
opening width 2 x 0.5 mm (switch with small contact opening width as
per EN IEC 61058-1). The switching elements are optionally equipped
with the following switching functions : One to three normally open (NO)
or normally closed (NC), or any combination of NO and NC plus
connections for T1 3/4 LED or lamp. The number of switching elements
cannot exceed three. The switching elements provided for the 3-position
switch actuators are equipped with max. 2 NC or 2 NO or any
combination. The number of switching elements cannot exceed two.
Material
Lens
raised mounting Polymethylmethacrylat (PMMA), as per UL 94 HB, flush
mounting Polycarbonat (PC), as per UL 94 V0, or aluminium anodized
Front bezel
polyetherimid (PEI), as per UL 94 V0, or aluminium anodized
Front ring
aluminium anodized
Material of contact
silver or silver with gold plating
Switching element
diallylphthalate (DAP), as per UL 94 V0 and Polyamide (PA 66), as per UL
94 V0
Actuator housing
polyetherimide (PEI), as per UL 94 V0, self-extinguishing
Mechanical characteristics
Terminals
solder
1 wire :
2 wires : 0.75 mm
Actuating torque
selector / Keylock switch : 2.5 ... 10 Ncm
Actuating force
pushbutton : 2.7 ... 3.6 N
Actuating travel
pushbutton : 3 mm
selector-/ keylock switch
momentary action:
maintained action:
Rebound time
the rebound times apply to normal manual activation
contact making: 3 ms
contact breaking: 5 ms
Mechanical lifetime
as per DIN IEC 60512-5-6 and EN IEC 60947-5-1
pushbutton maintained action:
pushbutton momentary action:
keylock switch:
selector switch:
Electrical characteristics
Standards
the devices comply with : EN IEC 61058-1 and EN IEC 60947-5-1
Rated operational voltage
U
Rated insulation voltage
U
Rated impulse withstand voltage
U
e
i
imp
= 320 VAC, as per EN IEC 60947-5-1
= 250 VAC, as per EN IEC 60947-1
= 4 kV, as per EN IEC 60947-1
rigid
0.5 ... 1.5 mm
2
2
flexible
0.5 ... 0.75 mm
0.5 mm
2 positions
approx. 42 °
approx. 90 °
2
1 million cycles of operation
2 million cycles of operation
50.000 cycles of operation
100.000 cycles of operation
2
superflexible
0.5 mm
3 positions
approx. 2 x 42 °
approx. 2 x 90 °
2
Contact resistance
new state with silver contact : 100 m
as per DIN IEC 60512-2-4, measured at 100 mA, 10 V
new state with gold plated contact : 50 m
as per DIN IEC 60512-2-3, measured at 20 mV, 10 mA
Electrical life
as per EN IEC 60947-5-1
Electrostatic discharge
keylock switch : 11 kV
Conventional free air thermal current
I
the maximum current in continuous operation and at ambient
temperature must not exceed the quoted maximum values.
Switch rating
switch rating AC with silver contact or silver contact with gold plating,
service category AC-15, as per EN IEC 60947-5-1
voltage : 125 VAC 250 VAC
current : 2.5 A 2 A
switch rating DC for silver contact or silver contact with gold plating,
service category DC-13, as per EN IEC 60947-5-1
voltage : 250 VDC
current : 0.15 A
Recommended minimum operational data
material of contact: Silver
voltage :
current :
Electric strength
2500 VAC, 50 Hz, 1 min., as per DIN IEC 60512-2-11 between all terminals
and earth
Overvoltage category
III, as per EN IEC 60947-5-1
Protection class
class II, as per EN IEC 61058-1
Degree of pollution
3, as per EN IEC 60947-1
Environmental conditions
Storage temperature
-40 °C ... +85 °C
Operating temperature
-25 °C ... +55 °C
Protection degree
as per EN IEC 60529
frontside IP 65 | backside IP 40
Shock resistance
(semi-sinusoidal) max. 100 m/s
3-axis, as per EN IEC 60068-2-27
Vibration resistance
(sinusoidal)
max. 100 m/s
Climate resistance
damp heat, cyclic :
96 hours, +25 °C / 97 %, +55 °C / 93 % relative humidity, as per EN
IEC 60068-2-30
damp heat, state :
56 days, +40 °C / 93 % relative humidity, as per EN IEC 60068-2-78
rapid change of temperature :
100 cycles, -40 °C ... +80 °C, as per EN IEC 60068-2-14
th
50.000 cycles of operation at 250 VAC, 5 A, cos
= 5 A, as per EN IEC 60947-5-1
2
at 10 Hz ... 500 Hz, as per EN IEC 60068-2-6
20 VAC/DC
100 mA
2
, pulse width 11 ms,
Silver with gold plating
5 VAC/DC
10 mA
o
Series 61
0.95
89
89