DLP-TH1B DLP Design Inc, DLP-TH1B Datasheet - Page 2

• Manufacturer Part Number: DLP-TH1B
• Description: MODULE SENSOR USB-BASED TEMP/HUM
• Manufacturer: DLP Design Inc

Specifications of DLP-TH1B

• Interface Type: USB
• Operating Supply Voltage: 5 V
• Product: Interface Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 813-1016

QUICK-START GUIDE
This guide requires the use of a Windows 98/ME/2000/XP PC that is equipped with at least
one available USB 1.1- or 2.0-compatible port.
1. If the DLP-TH1 board is connected to your PC, disconnect it at this time.
2. Insert the supplied program disk into the PC’s drive. Run the setup.exe program, and
3. Connect the DLP-TH1 to the PC via the provided USB cable. This action initiates the
At this point, the DLP-TH1 is ready for use. Run the application program and “Open” the
sensor module to start acquiring temperature and humidity data.
SPECIFICATIONS
Temperature
Range
Accuracy
Resolution
Repeatability
Response Time
Humidity
Range
Accuracy
Resolution
Repeatability
Response Time
follow the prompts. (You can also download the install software from
www.dlpdesign.com/usb/th1.html) Download the DLP-TH1 application software, then
unzip and run the setup program.
loading of the USB drivers. When prompted, select the
C:\Program Files\DLPDesign\DLP-TH1\USB Drivers
folder where the USB drivers are located (written in Step 2). Windows will then
complete the installation of the device drivers for the DLP-TH1. The next time the
DLP-TH1 module is attached, the host PC will immediately load the correct drivers
without any prompting. Reboot the PC if prompted to do so.
°C
-40 to 123.8°C
±2.0°C (-30 to 80°C)
0.01°C
±0.1°C
5-30 Sec.
0-100%RH
±3%RH (20 to 80%RH), ±5%RH (0 to 100%RH)
0.03%RH
±0.1%RH
4 Sec.
2
°F
-40 to 254.9°F
±3.6°F (-22°F to 176°F)
0.02°F
±0.2°F
5-30 Sec.