TC07COA Microchip Technology, TC07COA Datasheet - Page 9

• Manufacturer Part Number: TC07COA
• Description: IC TEMP SENSR 3V PROGBL 8SOIC
• Manufacturer: Microchip Technology

Specifications of TC07COA

• Sensing Temperature: 0°C ~ 70°C
• Output Type: Digital
• Voltage - Supply: 2.7 V ~ 5.5 V
• Accuracy: ±1°C
• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Full Temp Accuracy: +/- 1 C
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification

dsPICDEM™ MCHV Development System
This development system is intended for high-voltage (up to
400 volts at 6.5 amps) BLDC, PMSM and ACIM sensored
or sensorless applications. It provides a low-cost Integrated
Power Module (IPM) based system for users to evaluate
and develop applications using dsPIC33F motor control
DSCs via a Plug-In Module (PIM) or a 28-pin SOIC socket.
Isolated serial interfaces include RS-232C and USB (for
RTDM). Feedback support includes: Hall-Effect Sensors,
Shaft Encoder, Back EMF voltages and single or dual current
shunt resistors. A PFC circuit is provided to meet regulatory
requirements. An isolated built-in debugger (similar to a
starter kit programmer/debugger) permits a direct connection
with a PC.
dsPICDEM™ MCSM Development Board
This development board is intended for low-voltage (up to
80 volts at 3 amps) 2-phase uni-polar or bi-polar stepper
motor (4, 6 or 8 wire) applications. It provides a low-cost
system for users to evaluate and develop applications using
dsPIC33F motor control DSCs via a Plug-In Module (PIM)
or 28-pin SOIC socket. A USB serial interface for RTDM is
provided. Feedback support includes current and voltage.
Demo software to run motors in open-loop or closed-loop with
full or variable micro-stepping is provided. A DMCI/RTDM GUI
for controlling step commands, motor parameter input and
operation modes is included.
dsPICDEM™ MCSM Stepper Motor Development
Board Kit
The kit includes the dsPICDEM MCSM board, a stepper
motor and a 24-volt power supply. PICkit 3 In-Circuit
Debugger, MPLAB ICD 3 In-Circuit Debugger or REAL ICE
In-Circuit Emulator is required for programming or debugging
operations.
Buck/Boost Converter PICtail™ Plus Card
(AC164133)
A low-cost development platform for dsPIC33FGS SMPS
devices, the buck/boost converter PICtail Plus card has two
buck stage outputs and one boost stage output. This board
can be used with either the Explorer 16 board or the 16-bit
28-pin starter board and the dsPIC33FGS SMPS and digital
power conversion devices.
Touch Sensing Technology
mTouch™ Capacitive Touch Evaluation Kit
(DM183026)
Application Specific Development Tools
(DV330021)
Includes two main boards: one populated
with a PIC16F72X 8-bit MCU and the
other with a PIC24F256GB110 16-bit
MCU; and four daughter boards for
developing keys, sliders and a matrix.
(DM330022)
(DM330023)
PIC10F Capacitive Touch Board
This board demonstrates the simple implementation of
a single capacitive touch key or proximity sensor using a
PIC10F204/6 MCU.
mTouch AR1000 Development Kit
This kit provides everything designers need to get
started using AR1000 resistive controllers for a turn-key,
cost-effective solution. The kit includes the AR1000
development board, a 7 four-wire resistive touch screen, a
PICkit Serial Analyzer and all necesssary interface cables,
as well as a CD containing technical documentation and all
necessary software.
PICDEM™ Inductive Touch Development Kit
(DM183027)
This kit is an evaluation and development platform for
Microchip's Inductive Touch Technology. Factory programmed
fi rmware provides immediate access to all board features
using the MPLAB mTouch plug-in. Using a PICkit Serial
analyzer to communicate with the PC, it allows the user
to analyze application critical information in real-time as it
relates to sensor behavior.
USB
PIC32 I/O Expansion Board
PICDEM™ FS-USB Demonstration Kit
This demo kit is an easy-to-use evaluation platform for
Microchip's Full-Speed USB solution. The family of full-speed
USB microcontrollers fully support USB 2.0 and serial
communications of up to 12 Mbit/s. All of the hardware and
software needed to demonstrate and develop a complete
USB communication solution is included.
PIC18F14K50 Low Pin Count USB Development Kit
(DV164126)
This development kit provides an easy, low cost way to
evaluate the functionality of Microchip's PIC18F14K50 and
PIC18F13K50 20-pin USB microcontrollers. The kit contains
the hardware, software and code examples necessary to take
your USB design from concept to prototype.
USB PICtail™ Plus Daughter Board
This daughter board enables USB connectivity when using a
PIC24 or PIC32 USB PIM in conjunction with the Explorer 16
board.
This I/O expansion board provides PIC32
starter board (DM320001, DM320003)
users with full access to MCU signals,
JTAG debugging, ICSP development and
connection of PICtail Plus daughter cards.
www.microchip.com/tools
(DM320002)
(AC103003)
(DV102011)
(AC164131)
(DM163025)
9