NTHS0805N04N2003JE Vishay, NTHS0805N04N2003JE Datasheet - Page 56

• Manufacturer Part Number: NTHS0805N04N2003JE
• Description: THERMISTOR NTC 200K OHM 5% 0805
• Manufacturer: Vishay
• Series: NTHSr
• Type: NTCr

Specifications of NTHS0805N04N2003JE

• Resistance In Ohms @ 25°c: 200K
• Resistance Tolerance: ±5%
• B Value Tolerance: ±3%
• B25/75: 4247K
• Mounting Type: Surface Mount
• Package / Case: 0805 (2012 Metric)
• Description Of Terminals: Leadless
• Mounting Style: Surface Mount
• Pin Count: 2
• Screening Level: Automotive
• Sensitivity Index: 4247K
• Resistance @ 25c: 200kohm
• Percentage Of Resistance Tolerance @ 25c: ±5
• Accuracy: ±3
• Operating Temperature Min Deg. C: -40C
• Operating Temperature Max Deg. C: 125C
• Product Length (mm): 2mm
• Product Depth (mm): 1.25mm
• Lead Free Status / RoHS Status: Lead free by exemption / RoHS Compliant
• B0/50: -
• B25/50: -
• B25/85: -
• B25/100: -
• Operating Temperature: -
• Power - Max: -
• Lead Length: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 541-1134-2; NTHS0805N04N2003JE

10.12 RY/BY#: Ready/Busy#
56
Notes
1. VA = Valid address for programming. During a sector erase operation, a valid address is any sector address within the sector being
2. DQ7 should be rechecked even if DQ5 = 1 because DQ7 may change simultaneously with DQ5.
The RY/BY# is a dedicated, open-drain output pin which indicates whether an Embedded Algorithm is in
progress or complete. The RY/BY# status is valid after the rising edge of the final WE# pulse in the command
sequence. Since RY/BY# is an open-drain output, several RY/BY# pins can be tied together in parallel with a
pull-up resistor to V
If the output is low (Busy), the device is actively erasing or programming. (This includes programming in the
Erase Suspend mode.) If the output is high (Ready), the device is in the read mode, the standby mode, or in
the erase-suspend-read mode.
erased. During chip erase, a valid address is any non-protected sector address.
CC
.
S29GL-N MirrorBit
No
Table 10.5 on page 60
Figure 10.5 Data# Polling Algorithm
Read DQ15–DQ0
Read DQ15–DQ0
DQ7 = Data?
DQ7 = Data?
Addr = VA
Addr = VA
DQ5 = 1?
START
FAIL
D a t a
®
No
Yes
No
Flash Family
shows the outputs for RY/BY#.
S h e e t
Yes
Yes
PASS
S29GL-N_01_12 October 29, 2008