01C5001JF Vishay, 01C5001JF Datasheet - Page 4

• Manufacturer Part Number: 01C5001JF
• Description: THERM NTC 5K OHM 5% 28 AWG RAD
• Manufacturer: Vishay
• Series: Cr

Specifications of 01C5001JF

• Resistance In Ohms @ 25°c: 5K
• Resistance Tolerance: ±5%
• Lead Length: 1.42" (36.00mm)
• Mounting Type: Free Hanging
• Package / Case: Bead
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• B Value Tolerance: -
• B0/50: -
• B25/50: -
• B25/75: -
• B25/85: -
• B25/100: -
• Operating Temperature: -
• Power - Max: -

POINT MATCH TOLERANCE
The standard leaded thermistors are calibrated and tested at 25 °C to a tolerance of ± 5 % or ± 10 %; however, tighter tolerance,
point matched thermistors are readily available as are special point match temperatures to fit your application.
Since these thermistors have only one controlled point of reference (the point match temperature), the resistance at other
temperatures is given by the "Resistance vs. Temperature Conversion Tables" for the appropriate material curve. The resistance
value at any temperature is the ratio factor times the resistance at 25 °C.
Example: 1M1002-5, + 70 °C resistance = (Resistance factor for curve 1 at 70 °C is 0.1990) x (10 000 W resistance at 25 °C)
= 1990 Ω.
The tolerance of the resistance at any temperature is described by Figure 2.
FIGURE 2
POINT MATCH TOLERANCES VS. TEMPERATURE
COMPUTER AIDS FOR THERMISTOR SELECTION
A spreadsheet is available for the Vishay Thermistor Materials that calculates Beta, Steinhart-Hart Equation Constants A, B, and
C, the resistance at any temperature based upon the Steinhart constants or Beta, the temperature equivalent of the resistance
reading, and resistance temperature coefficients.
This spread sheet will also calculate the total resistance tolerance of any point matched thermistor for temperatures in 10 ºC
increments, and the resistance tolerance at any temperature within the calibrated range of curve tracking thermistors. Please
contact factory if interested in this Excel™ spreadsheet.
Document Number: 33003
Revision: 22-Sep-04
MAX. R vs. T
MIN. R vs. T
NOMINAL R vs. T
25 °C
TEMPERATURE
(CALIBRATION TEMPERATURE)
For technical questions, contact: [e-mail]
PIVOT POINT
NTC Thermistors, Coated
Point match resistance tolerances at temperatures other
than 25 ºC are not the same as the calibration temperature.
This difference is presented in Figure 2.
The tolerance at any given temperature is the point match
tolerance + the MT ± % (Manufacturing Tolerance).
The MT ± % may be obtained from the R vs. T Conversion
tables and is added to the point match temperature, i.e.,
± 1 % Tol. at 25 ºC + ± 2.6 % at - 30 ºC for Curve 1 equals a
total tolerance of ± 3.6 % at - 30 ºC.
Vishay Dale
www.vishay.com
M, C, T
107