B59601A0135A062 EPCOS Inc, B59601A0135A062 Datasheet - Page 23
![THERMISTOR PTC 470OHM 135DEG0603](/photos/1/32/13230/495-ptc_reset_1210_sml.jpg)
B59601A0135A062
Manufacturer Part Number
B59601A0135A062
Description
THERMISTOR PTC 470OHM 135DEG0603
Manufacturer
EPCOS Inc
Series
B59601r
Type
PTCr
Specifications of B59601A0135A062
Package / Case
0603 (1608 Metric)
Resistance In Ohms @ 25°c
470
Resistance Tolerance
±50%
Mounting Type
Non-Standard, Leadless
Thermistor Type
PTC
Resistance
470ohm
Svhc
No SVHC (18-Jun-2010)
Body Diameter
0.8mm
External Length / Height
1.6mm
Operating Voltage
32V
Resistance Temperature
-40°C
Rohs Compliant
Yes
Termination Style
SMD/SMT
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Operating Temperature
-
Power - Max
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
495-2414-2
B59601A 135A 62
B59601A135A62
B59601A 135A 62
B59601A135A62
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
B59601A0135A062
Manufacturer:
TDK-EPCOS
Quantity:
84 000
Part Number:
B59601A0135A062
Manufacturer:
EPCOS/爱普科斯
Quantity:
20 000
Mounting
Operation
Please read Cautions and warnings and
Important notes at the end of this document.
Sensors
Limit temperature sensors, EIA sizes 0603 and 0805
Electrode must not be scratched before/during/after the mounting process.
Contacts and housing used for assembly with thermistor have to be clean before mounting. Es-
pecially grease or oil must be removed.
When PTC thermistors are encapsulated with sealing material, the precautions given in chapter
"Mounting instructions", "Sealing and potting" must be observed.
When the thermistor is mounted, there must not be any foreign body between the electrode of
the thermistor and the clamping contact.
The minimum force of the clamping contacts pressing against the PTC must be 10 N.
During operation, the thermistor’s surface temperature can be very high. Ensure that adjacent
components are placed at a sufficient distance from the thermistor to allow for proper cooling at
the thermistors.
Ensure that adjacent materials are designed for operation at temperatures comparable to the
surface temperature of thermistor. Be sure that surrounding parts and materials can withstand
this temperature.
Avoid contamination of thermistor surface during processing.
Use thermistors only within the specified temperature operating range.
Use thermistors only within the specified voltage and current ranges.
Environmental conditions must not harm the thermistors. Use thermistors only in normal at-
mospheric conditions. Avoid use in deoxidizing gases (chlorine gas, hydrogen sulfide gas, am-
monia gas, sulfuric acid gas etc), corrosive agents, humid or salty conditions. Contact with any
liquids and solvents should be prevented.
Be sure to provide an appropriate fail-safe function to prevent secondary product damage
caused by abnormal function (e.g. use VDR for limitation of overvoltage condition).
Page 23 of 26
Standard series