Z-15GD-B7 SEV Omron, Z-15GD-B7 SEV Datasheet - Page 14

• Manufacturer Part Number: Z-15GD-B7 SEV
• Description: MICROSWITCH, PLUNGER
• Manufacturer: Omron

Specifications of Z-15GD-B7 SEV

• Contact Configuration: SPDT
• Microswitch Type: Snap Action
• Actuation Type: Plunger
• Contact Voltage Dc Nom: 250V
• Contact Current Max: 15A
• Switch Terminals: Quick Connect
• Svhc: No SVHC
• Operating Force: 350gf
• Actuator Style: Plunger
• Operating Force Max: 350gf
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

14
Z
Unit: mm (inch)
Side mounting
Solder terminal (blank)
The solder terminal type can be supplied with
molded terminals with a choice of five different lead
outlet directions. When placing your order for the
molded terminal type, add the following code to the
model number.
Note: 1. Standard leads are single-core vinyl cords (VSF) with a nominal cross sectional area of 1.25 mm
The following diagrams show the molded terminal version of sealed type Z-15GW2255, with a mold thickness of 12 mm.
Z-15GW2255-ML
(left-hand)
Note: Respective directions of lead outlets are determined with the plunger viewed on your left.
Type
VSF (single-core, vinyl cord)
VCT (vinyl-insulated cable)
MOUNTING HOLES
TERMINALS
MOLDED TERMINAL TYPE
ORDERING INFORMATION
DIRECTIONS OF LEAD OUTLETS
LEAD WIRE SPECIFICATIONS
2. Standard vinyl cord lengths are 1 m, 3 m, and 5 m.
3. Mold thickness will be 19 mm when using VCT cords.
4. Standard unit has three lead outlets in the same direction.
5. Connect the black lead to the COM terminal, white lead to the NO terminal, and red lead to the NC terminal, respectively.
Z-15GW2255-MF
(forward)
Nominal cross-
sectional area (mm
1.25
Panel mounting plunger type
-M
Z-15GW2255-MR
(right-hand)
2
)
Mold thickness
(No symbol)…a = 12 mm
with VSF
19…a = 19 mm with VCT
Finished outer
diameter (mm)
Approx. 3.1
Approx. 9.6 (2-core)
Approx. 10.5 (3-core)
Lead outlet directions
(L, R, D, F, H)
Screw terminal (B)
Z-15GW2255-MH
(rearward)
Connection to
terminal
Black-COM
White-NO
Red-NC
Roller plunger type
Three M4 x 5.5 dia.
Terminal screws
(with tooth washers)
2
.
Z-15GW2255-MD
(underside)
Length (m)
0.5, 1, 2, 3, 5
(standard)
Z