SNAP-AOV-5 OPTO 22, SNAP-AOV-5 Datasheet - Page 5
![I/O Module, Snap Analog, Single Channel, 0 Volt DC To 10 Volt DC Output](/photos/39/15/391539/691-0464_large_sml.jpg)
SNAP-AOV-5
Manufacturer Part Number
SNAP-AOV-5
Description
I/O Module, Snap Analog, Single Channel, 0 Volt DC To 10 Volt DC Output
Manufacturer
OPTO 22
Type
Outputr
Datasheet
1.SNAP-AOA-23.pdf
(14 pages)
Specifications of SNAP-AOV-5
Brand/series
SNAP Series
Current, Load
10 mA (floating)
Input Type
12-bit serial data
Mounting Type
DIN Rail
Number Of Channels
1
Output Type
Analog
Output, Range
0 to 10 Volts DC (floating)
Primary Type
Control
Resolution
2.44 mV
Response Time
99.9%/19.98 V/3 mS
Voltage, Supply
5 V
Voltage Rating
5VDC
Current Rating
150mA
Length
90.17mm
External Width
82.55mm
External Depth
18.29mm
Leaded Process Compatible
No
Peak Reflow Compatible (260 C)
No
Rohs Compliant
No
Accessory Type
Analog Voltage Output Module
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Isolated Dual-Channel Current
Output 4–20 mA
© 2006–2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
Description
The SNAP-AOA-23-iSRC and SNAP-AOA-23-iSRC-FM
modules provide a nominal output range of 4 mA to 20 mA.
These modules include built-in loop sourcing capability.
The SNAP-AOA-23-iSRC-FM is Factory Mutual approved.
With the connection of a single 24 V power supply, these
modules source two 24 V loops. The loop sources are
internally connected to the individual outputs.
The two channels and their loop sources are isolated from
each other; they do not share any field connection. In
addition, each loop source is current limited so that an
external fault on one loop will not affect the other.
SNAP Analog Output Modules
IMPORTANT: The mounting rack connector has 24 pins; the
module connector has 20 pins. The extra pins on the
mounting rack connector prevent misalignment of the
module during installation.
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
Specifications:
Part Number
SNAP-AOA-23-iSRC
SNAP-AOA-23-iSRC-FM
Input
Outputs
Span
Resolution
Response Time
(% of span/delta I/ delta time)
DC Common Mode Rejection >-120 dB
AC Common Mode Rejection >-120 dB @ 60 Hz
Maximum Operating
Common Mode Voltage
Common Mode Resistance
Accuracy
Gain Temperature Coefficient 50 PPM/°C
Offset Temperature Coeffi-
cient
Max. Loop Resistance
@ Loop Supply
Ambient Temperature:
Operating
Storage
Isolation: Optical
Isolation: Transformer
Isolation: Channel to Channel
Power Requirements
Power Requirements -
Loop Power (Input)
Loop Power (Output)
Agency Approvals
Torque, hold-down screws
Torque, connector screws
Warranty
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
Description
Isolated dual-channel analog
4–20 mA output with loop sourcing
12-bit serial data (each channel)
4 to 20 mA (each channel)
16 mA
3.9 microamps
99.9%/15.98 mA/3 mS
250 V
>1000 Megohms
0.1% of Span
20 PPM/°C
950 Ohms
0 °C to 70 °C
-25 °C to 85 °C
4000 V
1500 V
250 V continuous
(1500 V transient)
5 Volts DC (±0.15) @ 200 mA
From separate field connector;
24 VDC nominal (70 mA max)
@ 24 V input, both loops
@ 20 mA), 30 VDC maximum
24 VDC (±1.5 V) @ 20 mA
Open loop: 30 V maximum
Shorted loop: 24 mA nominal
CE, RoHS, DFARS
FM (SNAP-AOA-23-iSRC-FM
only)
4 in-lb (0.45 N-m)
5.26 in-lb (0.6 N-m)
Lifetime
PAGE
5