C200H-WPA204 Omron, C200H-WPA204 Datasheet - Page 18
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
C200H-WPA204
Manufacturer Part Number
C200H-WPA204
Description
120/240 VAC POWER SUPPLY
Manufacturer
Omron
Datasheet
1.C200H-WPA204.pdf
(21 pages)
Specifications of C200H-WPA204
Rohs Compliant
YES
System Power and Expansion
Replacing C200H I/O Modules
J Replacing C200H I/O Modules with CS1 I/O Modules
This section shows the corresponding CS1 I/O models and notes for replacing C200H I/O Modules.
16-point DC Input Modules
32-point DC Input Modules
64-point DC Input Modules
16-point Sinking Transistor Output Modules
Item
Model number
Description
Notes
Item
Model number
Description
Notes
Item
Model number
Description
Notes
Item
Model number
Description
Notes
C--166
Programmable Controller
C200H I/O Modules
C200H-ID212
16-point DC Input Modules with terminal blocks
The terminal arrangement must be changed.
The impedance increases (from 3 kΩ to 3.3 kΩ). Check that correct operation is possible in
cases where increased impedance may influence operation.
The internal 5-V current consumption increases (from 10 mA to 100 mA). Check that the
increased current is within the range of the power supply.
C200H I/O Modules
C200H-ID218/C200H-ID216
32-point DC Input Modules with connectors. The connectors, the pin arrangement, and the input
specifications are the same.
There are 2 commons instead of 1. Connect where necessary.
The input specifications change (e.g., the impedance decreases and the input current
increases from 4.1 mA to 6 mA.) Check that correct operation is possible in cases where
changes in input specifications may influence operation.
The internal 5-V current consumption increases (from 100 mA to 150 mA). Check that the
increased current is within the range of the power supply.
C200H I/O Module
C200H-ID219/C200H-ID217
64-point DC Input Modules with connectors. The connectors, the pin arrangement, and the input
specifications are the same.
There are 4 commons instead of 2. Connect where necessary.
The input specifications change (e.g., the impedance decreases and the input current
increases from 4.1 mA to 6 mA.) Check that correct operation is possible in cases where
changes in input specifications may influence operation.
The internal 5-V current consumption increases from 120 mA to 150 mA (C200H-ID219) and
from 100 mA to 150 mA (C200H-ID217). Check that the increased current is within the range of
the power supply.
C200H I/O Module
C200H-OD212
16-point Transistor Output (sinking) Modules with terminal blocks. The output current capacity
increases (from 0.3 A per point and 4.8 A per Module to 0.5 A per point and 8 A per Module).
he rated voltage range also increases (from 24 V to any voltage in the range 12 to 24 V.)
The terminal arrangement must be changed.
The output specifications change. Check that correct operation is possible in cases where
changes in output specifications may influence operation. (Residual voltage increases from 0.8 V
to 1.5 V, ON response time increases from 0.1 ms to 0.5 ms, OFF response time increases from
0.3 ms to 1 ms.)
CS1
Corresponding CS1 I/O Modules
CS1W-ID211
Corresponding CS1 I/O Modules
CS1W-ID231
Corresponding CS1 I/O Module
CS1W-ID261
Corresponding CS1 I/O Module
CS1W-OD211