R2PBA BANNER ENGINEERING, R2PBA Datasheet - Page 4

• Manufacturer Part Number: R2PBA
• Description: Power Block Module
• Manufacturer: BANNER ENGINEERING

Specifications of R2PBA

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Output Type: SPST, Solid-State, 2-Wire
• Supply Voltage Max: 130V
• Supply Current: 10A
• Power Rating: 2W
• Supply Voltage Min: 105V
• Sensor Output: Transistor

4
OPPOSED
MODE
RETRO
MODE
OPPOSED
MODE
DIFFUSE
MODE
DIFFUSE
MODE
FIBER OPTIC Mode
FIBER OPTIC Mode
Sensing Mode
(glass fibers)
RETROREFLECTOR
OBJECT
OBJECT
OBJECT
OBJECT
OBJECT
RSBF
Range: see excess gain
curves
Beam: infrared, 880nm
Response:
HP, 2W modes: 10ms
HS mode: 1ms
SP mode: 0.3ms
Repeatability:
HP, 2W= 3.3ms;
HS = 0.3ms;
SP = 0.1ms
NOTE: if the
retroreflective sensing
mode is used in
conjunction with the
HP or 2W program
mode, the GAIN control
must be reduced from
the factory setting in
order to avoid optical
feedback from the lens
assembly.
For information on the
complete line of Banner
glass fiber optics, see
Banner product catalog.
RSBFP
The model RSBFP will
function only when
programmed for the "HS"
response mode.
The model RSBFP will
not operate with 2-wire
power blocks (models
R2PBA and R2PBB).
Range: see excess gain
curves
Beam: visible red, 650nm.
Response:
HS mode only, 1ms on/off
Repeatability:
HS = 0.3ms
For information on the
complete line of Banner
plastic fiber optics, see
Banner product catalog.
Models
Model RSBFP is a visible-light sensor head designed for use with plastic fiber
optics. It is compatible with all standard Banner plastic fiber optic assemblies
(see Banner product catalog). In order to function properly, the RSBFP must be
programmed for the "HS" response mode. The RSBFP is not for use with glass
fiber optics (instead use model RSBF or RSBFV).
Excess Gain
Beam Pattern