EK-F3_R SENSIRION, EK-F3_R Datasheet - Page 7

• Manufacturer Part Number: EK-F3_R
• Description: Sensor Evaluation Kit
• Manufacturer: SENSIRION

Specifications of EK-F3_R

• Kit Contents: Sensor, 9-pin D-sub Cable. Legris & Hausamann Connector, Power Adapter, FlowViewer CD
• Tool / Board Applications: Gas Mass Flow Meter
• Development Tool Type: Hardware / Software - Eval/Demo Board
• Rohs Compliant: Yes
• For Use With: Sensirion Type EM1NR
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EK-F3 Evaluation Kit
Important Notices
Warning, personal injury
Do not use this product as safety or emergency
stop devices or in any other application where
failure of the product could result in personal
injury. Failure to comply with these instructions
could result in death or serious injury.
Should buyer purchase or use SENSIRION AG products for any such
unintended or unauthorized application, Buyer shall indemnify and hold
SENSIRION AG and its officers, employees, subsidaries, affiliates and
distributors harmless against all claims, costs, damages and expenses,
and reasonable attorney fees arising out of, directly or indirectly, any claim
of presonal injury or death associated with such unintended or unauthor-
ized use, een if such claim alleges that SENSIRION AG was negligent
regarding the design or manufacture of the part.
ESD Precautions
The CMOSens
electronic device. For this reason Sensirion recom-
mends to use standard ESD (electrostatic discharge)
precautions when handling this device.
FCC and CE Statement
The CMOSens
tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules
(FCC CFR 47). These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio com-
munications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is en-
couraged to try to correct the interference by one of
more of the following measures:
Headquarters and Sales Office
Sensirion AG
Eggbühlstr. 14
P.O. Box
CH-8052 Zürich
Switzerland
www.sensirion.com


EcoLine Mass Flow Meter is an
EcoLine MFM product has been
Phone: + 41 (0)1 306 40 00
Fax:
e-mail:
http://www.sensirion.com/
[e-mail]
+ 41 (0)1 306 40 30
Warranty
SENSIRION AG makes no warranty, representation
or guarantee regarding the suitability of its product for
any particular purpose, nor does SENSIRION AG
assume any liability arising out of the application or
use of any product or circuit and specifically disclaims
any and all liability, including without limitation conse-
quential or incidental damages. “Typical” parameters
can and do vary in different applications. All operating
parameters, including “Typical” must be validated for
each customer applications by customer’s technical
experts.
SENSIRION AG reserves the right, without further
notice, to change the product specifications and/or
information in this document and to improve reliability,
functions and design.
CMOSens
trademark of Motorola.
Copyright 2003, Sensirion AG. All rights reserved.
The CMOSens
norm EN 61000-6-1 to EN 61000-6-4 (Immunity and
Emission Test Series).
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equip-
ment and the receiver
Connect the equipment into an outlet on a
circuit different from that to which the re-
ceiver is connected.
Consult a dealer or an experienced radio/TV
technician for help.

is a trademark of Sensirion. SPI is a

EcoLine device fully complies with
Page 7 of 7