D6F-CABLE2 Omron, D6F-CABLE2 Datasheet - Page 2
![Sensor Cable Assembly](/photos/17/81/178185/lpomrond6fseries_sml.jpg)
D6F-CABLE2
Manufacturer Part Number
D6F-CABLE2
Description
Sensor Cable Assembly
Manufacturer
Omron
Type
Cable for MEMS Mass Flow Sensor D6F-03A3-000r
Specifications of D6F-CABLE2
Cable Length
200mm
Cable Assembly Type
Sensor
Sensor Type
Cable for MEMS Mass Flow Sensor D6F-03A3-000
Analog Output
1 V to 5 V
Supply Voltage
10.8 V to 26.4 V
Brand/series
XS5
Cable End 1, Connector Type
Plug
Ip Rating
IP 67
Length, Cable
10 m
Number Of Conductors
4
Primary Type
Cable
Accessory Type
Cable
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With/related Products
D6F MASSFLOW SENSOR
For Use With
Omron D6F-03A3-000 Sensor
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
D6F-P
Characteristics / Performance
Note:
2
Models
Flow Range (See note 1.)
Calibration Gas (See note 2.) Air
Flow Port Type
Electrical Connection
Power Supply
Current Consumption
Output Voltage
Accuracy
Repeatability (See note 3.)
Output Voltage (Max.)
Output Voltage (Min.)
Rated Power Supply Voltage
Rated Output Voltage
Case
Degree of Protection
Withstand Pressure
Pressure Drop (See note 3.)
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Temperature Characteristics
Insulation Resistance
Dielectric Strength
Weight
1. 0 to 1 L/min. (normal) volumetric flow rate at 0 °C, 101.3kPa.
2. Dry gas. (must not contain large particles, eh dust, oil, mist)
3. Reference (typical)
35 to 85% RH (with no icing or condensation)
± 5% F.S. max. of detected characteristics at 25 °C (within -10 to 60 °C)
20 MΩ (500 VDC between lead terminal and the case)
500 VAC, 50/60 Hz for 1 minute. (Leakage current typ. Max. 1mA) between lead terminals and case.
8.5 g
0 to 1 L/min.
barbed fitting maximum outside dia. 4.9 mm
Lead terminal
4.75 to 5.25 VDC
Max. 15 mA (no load, Vcc = 5 VDC)
0.5 to 2.5 VDC
± 5% F.S. max. of detected characteristics at 25 °C (typical test results within +/-2% F.S.)
± 0.4% F.S.
3.1 VDC (Lead resistance 10 kΩ)
0 VDC (Lead resistance 10 kΩ)
10 VDC
4 VDC
PBT
IP40
50 kPa (7 psi)
0.19 kPa
-10 to 60 °C (with no icing or condensation)
35 to 85% RH (with no icing or condensation)
-40 to 80 °C (with no icing or condensation)
D6F-P0010A1
Connector (3 wire)
D6F-P0010A2
manifold mount
0.48 kPa
8.0 g
D6F-P0010AM2
D6F-P