MBCC-312 BANNER ENGINEERING, MBCC-312 Datasheet - Page 12

• Manufacturer Part Number: MBCC-312
• Description: QUICK DISCONNECT CABLE, 7/8-16 3POS, STR
• Manufacturer: BANNER ENGINEERING

Specifications of MBCC-312

• Voltage Ac: 250V
• Voltage Rating Vdc: 300V
• Cable Length: 4m
• No. Of Contacts: 3
• Wire Size (awg): 18
• Assembly Cable Type: PVC
• Connector Type B: 3 Pin Micro Connector
• Brand/series: MBCC
• Dimensions: 2.4 in. L x 1.1 in. Dia.
• Primary Type: Cable
• Sensor Type: Photoelectric
• Voltage, Rating: 10 to 30 VDC
• Voltage, Supply: 10 to 30 VDC
• Cable Assembly Type: Sensor
• Connector Type A: Free End
• For Use With: Q45 Series
• Lead Free Status / Rohs Status: RoHS Exempt Product

Q45VR2 Series — ac-Voltage Sensors
P/N 36339 rev. E
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: [phone] • www.bannerengineering.com • Email: [e-mail]
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any
other warranty either expressed or implied.
!
WARNING . . .
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult
your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel
protection.
Not To Be Used for Personnel Protection