1R6004A20A120 DANIEL WOODHEAD, 1R6004A20A120 Datasheet - Page 23
![MINI-CHANGE CORD, 7/8-16 SOC CONTACTS, 6POS, RECPT](/photos/19/85/198518/4606598_sml.jpg)
1R6004A20A120
Manufacturer Part Number
1R6004A20A120
Description
MINI-CHANGE CORD, 7/8-16 SOC CONTACTS, 6POS, RECPT
Manufacturer
DANIEL WOODHEAD
Series
Mini-Changer
Datasheet
1.803000D01M050.pdf
(78 pages)
Specifications of 1R6004A20A120
Wire Size (awg)
16
Assembly Cable Type
PVC
Jacket Color
White, Red, Green, Orange, Black, Blue
Connector Type B
Stripped End Lead
Cable Color
Yellow
Gender
Female
Cable Length
1ft
Rohs Compliant
Yes
Cable Assembly Type
Sensor
Connector Type A
Straight Circular Receptacle
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
www.molex.com/product/mx150Lsealedwtw.html
MX150L
Connector System
The pre-assembled, submersible MX150L is a high
performance connector system suitable for challenging,
rugged and harsh applications.
The MX150L sealed connector system is designed to meet
the need for a rugged, environmentally sealed connector
system supporting both low-level signal applications as
well as power applications up to 40.0A, from on-engine
automotive and marine applications to off-road construction
equipment applications. The system is comprised of wire-to-
wire, wire-to-panel and wire-to-board configurations.
Features and Benefits
•
•
•
•
MX150L Sealed Connector Systems - Exploded View
Receptacle Connector
Plug Connector
NOTE: All discrete components shown above for
Pre-assembled connector housings, seals, TPA
components and mat-seal cap shipped in 1 piece
to provide applied labor and cost savings
Integral TPA assures that crimped terminal leads are
properly locked into connector (TPA will not seat into final
lock position and connector system will not latch
if terminal is not locked properly into position)
Conforms to UL 1977, which allows for a UL recognized
sealed connector system for use in data, signal, control
and power applications
Superior electrical and mechanical performance
capabilities surpass performance of most mature
competitive products in market
both the receptacle and plug housings
are pre-assembled. Terminals are simply
crimped and poked into the housings.
No additional wire seals, wedge locks or
CPA locks are required.
™
Sealed
Seal Cap
Terminal Position
Assurance (TPA)
These innovative mat-sealed connectors are based upon the
1.50 and 2.50mm (.059 and .098") blade-type terminals.
This design eliminates the need to purchase, handle and
crimp individual wire seals to lower applied cost. The mat-
seal design is a single silicone-based seal with individual
wire openings and a seal cap to protect, securely retain and
provide strain relief to the seal. The cost-effective connector
design features all-in-one plug and receptacle housings with
pre-assembled mat-wire and interfacial connector seals.
Integral Terminal Position Assurance (TPA) and optional
Connector Position Assurance (CPA) components eliminate
time-consuming and costly assembly operations. Completing
the application is as simple as crimping the appropriate
terminal, inserting the crimped terminal lead and seating
the TPA to its final locked position. No additional components
are required.
•
•
•
•
Audible and tactile clicks on insertion, extraction and
mating feedback facilitates reliable mating and terminal
loading and removal
Unused circuits can be blocked using plastic seal plugs,
which facilitates flexibility of sealing unused circuits
without adding complexity to part numbers and customer
inventory
Integral locking latch with secondary, pre-loaded CPA
option assures that connector system is properly latched.
CPA will not move to final locked position if connector is
not latched. Confirms positive mating of connector
Sealed panel mount plugs are equipped with a blind hole
loss feature that reduces extra hardware while improving
the sealing process during assembly by eliminating a
leak path
Connector Position Assurance
(CPA) - Optional
Mat Seal
Interface Seal
Retainer Cap
Housing
Housing
Terminal Position
Assurance (TPA)
Tooling solutions include FineAdjust™ crimp press
applicators for high-volume production, as well as hand
tools for low-volume production and field repairs.
•
•
•
•
Mat Seal
Integral, 2-way mat and interface seals designed and
tested to IEC IP 67 exceeds “waterproof” demands as
a true sealed connector system tested under submersed
conditions in various fluids
Easy terminal insertion and extraction provides quick,
low-cost field repairs using common screwdriver, needle
nose pliers and terminal extraction tool
Protective mat-seal cap protects, securely retains and
provides strain relief to wire seal interface
Simple crimp, poke and plug application eliminates need
to crimp individual wire seals
Seal Cap
MX10 S-23
S