BTY801N-FBB DANIEL WOODHEAD, BTY801N-FBB Datasheet - Page 4
![Sensor Cable Assembly](/photos/19/87/198731/4437721_sml.jpg)
BTY801N-FBB
Manufacturer Part Number
BTY801N-FBB
Description
Sensor Cable Assembly
Manufacturer
DANIEL WOODHEAD
Datasheet
1.803000D01M050.pdf
(78 pages)
Specifications of BTY801N-FBB
Connector Type B
Male
Connector Type A
Male
Cable Assembly Type
Sensor
FS
Perma-Seal
Heavy-Duty Copper Lugs and
Splices
Star Ring Terminals
Note: The connectors shown here are only a representation of our product
S-4 MX10
Specialty Connectors
Seamless
Barrel
Wire
Size
line. For a complete listing of all solderless terminals and connectors,
please contact Molex at 1-800-800-0449, or at www.molex.com.
Flared
Barrel
Entry
™
Terminals and Splices
Stud
Size
Perma-Seal terminals and splices provide a rugged,
environmentally sealed connection for wire sizes 8 to
22 AWG that will insulate, seal and protect joints from
physical abuse and abrasion, water, salt and other corrosive
compounds.
These terminals give you long-lasting, moisture-proof
connections that withstand water, salt, corrosion and heat, all
of which cause serious problems for conventional, unsealed
splices. The inner wall of the heat-shrinkable insulation
sleeve is lined with a special hot-melt adhesive that is inert
at room temperature, permitting wires to be inserted easily
into the splices and terminals. As the sleeve is heated, the
adhesive melts and flows under pressure from the tubing.
This action creates a voidless seal that repels moisture
incursion even during pressure cycling, and stands up to
some of the most rigorous tests that can be applied to high-
performance splices, such as the salt fog test MIL-T-7928.
Our heavy-duty closed end crimpable terminals are
designed for electrical and industrial applications such as
welding equipment, forklifts, generators, power distribution
equipment, motors, etc. They are manufactured of pure
electrolytic copper, and are available in 8 AWG through
4/0 AWG wire and cable with a variety of stud sizes.
The Star Ring is a serrated ring that is mainly used for
grounding. Unlike a ring terminal, when you tighten down
on a star ring, the “star blades,” or serrated edges, actually
pierce through paint or other coatings, and bite into the
metal to insure a good connection or ground. The product
may also eliminate the need for lock washers.
Features
Material: Brass or Steel
Non-insulated, PVC insulated, or nylon insulated
Wire ranges from 18 to 22 AWG and 14 to 16 AWG
The tough insulation sleeve of Perma-Seal splices and
terminals resists abrasion and cutting. This protection helps
to maintain the insulation and sealing properties even in the
most hostile environments, inside and out.
Features
•
•
•
•
•
•
•
•
Rated to 35KV applications
UL listed, CSA certified
Crimps in industry standard tooling
Seamless barrel design
Can be easily soldered or crimped
Flared barrel entry for easy wire insertion
AWG wire size identification on barrel
Made of CDA-110 Copper stock offering
100% conductivity
www.molex.com/product/sterm/