HEDS-6140#B09 Avago Technologies US Inc., HEDS-6140#B09 Datasheet - Page 7

• Manufacturer Part Number: HEDS-6140#B09
• Description: Optical Encoder
• Manufacturer: Avago Technologies US Inc.
• Type: 2 & 3 Channelr
• Series: HEDS-61X0r

Specifications of HEDS-6140#B09

• No. Of Channels: 2
• Rotational Speed Max: 30000rpm
• Supply Voltage Range: 5VDC
• Encoder Resolution: 1000CPR
• Leaded Process Compatible: Yes
• Pulses Per Revolution: 1000
• Number Of Channels: 3
• Operating Temperature Range: - 40 C to + 100 C
• Product: Optical
• Size / Dimension: 1/2 in
• Mounting Type: 0.5" Shaft Mount
• Mounting Hole Dia: 0.5"
• Rohs Compliant: Yes
• Sensor Supply Voltage: 5VDC
• Encoder Type: Optical
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Electrical Interface
To insure reliable encoding performance, the HEDS-9040
and 9140 three channel encoder modules require 2.7
kΩ (±10%) pull-up resistors on output pins 2, 3, and 5
(Channels I, A and B) as shown in Figure 1. These pull-up
resistors should be located as close to the encoder mod-
ule as possible (within 4 feet). Each of the three encoder
module outputs can drive a single TTL load in this con-
fi guration.
Figure 2. HEDS-9X40 Mounting Tolerance.
7
Figure 1. Pull-up Resistors on HEDS-9X40 Encoder Module Outputs.
Mounting Considerations
Figure 2 shows a mounting tolerance requirement for
proper operation of the HEDS-9040 and HEDS-9140. The
Aligning Recess Centers must be located within a toler-
ance circle of 0.005 in. radius from the nominal locations.
This tolerance must be maintained whether the module
is mounted with side A as the mounting plane using
aligning pins (see Figure 5), or mounted with Side B as
the mounting plane using an alignment tool (see Figures
3 and 4).