D12SP6FPHQ BANNER ENGINEERING, D12SP6FPHQ Datasheet - Page 2

• Manufacturer Part Number: D12SP6FPHQ
• Description: DIN Fiber Optic Sensors
• Manufacturer: BANNER ENGINEERING
• Type: High Powerr

Specifications of D12SP6FPHQ

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Fiber Optic Sensor Type: High Power

2
Specifications, D12FPH Series sensors
Sensing range:
Sensing beam:
Supply voltage:
Protected against reverse polarity and inductive load transients.
Sensor model listing
Solid-state dc outputs:
The N.C. (normally closed) output may be used as an alarm output,
depending upon the hookup to the power supply.
Output rating
power-up. (False pulse protection circuit causes a 20 millisecond delay
on power-up.) Short-circuit protected.
Off-state leakage current <10 microamps at 30V dc.
On-state saturation voltage <1V at 10 mA dc; <1.5V at 150 mA dc.
The total load may not exceed 150 mA.
Response time:
Repeatability is 130 microseconds.
Response time and repeatability are independent of signal strength.
Indicators:
green, and one 7-segment red LED moving-dot bargraph.
GREEN LED lights to indicate
YELLOW LED lights to indicate
DUCTING
7-segment moving dot red LED bargraph lights to indicate relative
received light signal strength. In addition, segment #1 flashes to
indicate
MARGINAL EXCESS GAIN
least one second, or a "light" signal that lights LED #3 for at least one
second). A flashing LED corresponds to the “on” state of the alarm
output. See page 1 for further description.
Adjustments:
slotted brass screw, clutched at both ends of adjustment).
Hookup Diagrams, D12FPH Series Sensors
Sinking (NPN)
Standard Hookup
D12SN6FPH
D12SN6FPHQ NPN sinking complementary outputs,
D12SP6FPH
D12SP6FPHQ PNP sourcing complementary outputs,
Sourcing (PNP)
Standard Hookup
OUTPUT OVERLOAD
.
Two top-mounted LED indicators, one yellow and one
: 150 mA maximum each output. No false pulse on
NPN sinking complementary outputs, attached cable.
6-inch pigtail with pico-style QD.
PNP sourcing complementary outputs, attached cable.
6-inch pigtail with pico-style QD.
SENSITIVITY control on top of module (15-turn
visible red, 660 nanometers.
see individual excess gain curves, page 3.
.5 millisecond "on"; .5 millisecond "off".
10 to 30V dc at 45 mA max, exclusive of load.
(a "dark" signal that lights LED #2 for at
and output configurations:
DC POWER ON
, and segment #7 flashes to indicate
NORMALLY OPEN OUTPUT CON-
DIN RAIL Fiber Optic Sensors
.
Construction:
cover. Rated NEMA 2. The fiber clamping element is Delrin
Cable:
or 6-inch pigtail with pico-style 4-pin QD connector. Use mating
cable model PKG4-2 (straight connector) or PKW4-2 (right angled);
6-1/2 feet (2 m) long. *Models also available with 30 ft (9 m)
attached cable.
Mounting bracket:
dard DIN rail, or may be through-hole mounted using the supplied
mounting bracket and M3 x 0,5 stainless steel hardware. Bracket
material is black VALOX
Operating temperature range:
Maximum relative humidity 90% at 50°C (non-condensing).
Application caution...
D12 Series sensors are designed to deliver very high optical energy
(excess gain). They should not be used for applications which offer
low optical contrast (i.e. only a small difference in received light levels
between the light and dark sensing conditions). Examples include
diffuse mode sensing of objects in front of a reflective background
and opposed mode sensing of non-opaque materials.
D12 sensors excel in applications requiring high excess gain (e.g.
for long-range sensing, sensing with long fiber lengths, diffuse sensing
of materials with low reflectivity, etc.)
Alarm Hookup
Sinking (NPN)
Alarm Hookup
Sourcing (PNP)
Model PKG4-2 cable
6-1/2-foot long (2 meter) attached PVC-covered cable*
Black ABS (Cycolac
D12 Series sensors mount directly to a stan-
®
.
-20° to +70°C (-5° to +158°F).
Model PKW4-2 cable
®
KJB) housing with acrylic
®
.