E3X-NA11F Omron, E3X-NA11F Datasheet - Page 18

• Manufacturer Part Number: E3X-NA11F
• Description: Fiber Amplifier
• Manufacturer: Omron
• Type: High Speed Detectionr

Specifications of E3X-NA11F

• Sensor Output: NPN
• Length/height, External: 31.5mm
• Sensor Housing: Rectangular
• Response Time: 40ms
• Sensing Range Min: 0.3mm
• Output Type: NPN
• Sensor Input: Fiber Optic
• External Width: 10mm
• External Depth: 64.3mm
• Operating Temperature Max: 55°C
• Operating Temperature Min: -25°C
• Rohs Compliant: Yes
• Fiber Optic Sensor Type: High Speed Detection
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

18
E3X-SD/-NA
Operating Procedure
E3X-SD@
A 7-segment display showing excess gain is provided in
addition to the orange operation indicator.
Use these when adjusting the light axis and setting the
sensitivity at setup.
The sensitivity can be set with the UP and DOWN Keys similar
to using an adjuster knob. The sensitivity can also be easily
set by using the following three teaching functions.
The sensitivity can be set to the maximum. This is the optimal
setting for resistance against the effects of dust.
Two points (one with the workpiece and the other without) are
detected, and the operating level is set to the midpoint.
Changes within a time are detected, and the operating level is
set to the midpoint between the maximum and the minimum
values of the changes. This setting is optimal for when the
workpieces cannot be stopped.
Set the TEACH/RUN selector
switch to TEACH.
Press the UP Key for 3 s min.
Set the TEACH/RUN selector
switch to RUN (start of mea-
surement).
Set the TEACH/RUN selector
switch to TEACH.
Press the UP Key with the
workpiece present.
Press the UP Key with the
workpiece not present.
Set the TEACH/RUN selector
switch to RUN (start of mea-
surement).
Set the TEACH/RUN selector
switch to TEACH.
Press the UP Key.
1
Display/indicator status (for L/ON)
2
2-1. Maximum Sensitivity Setting
2-2. Teaching with/without a Workpiece
Operation description
2-3. Automatic Teaching
Operation description
Operation description
Displays
Sensitivity Setting
Operation indicator
Excess gain display
Switch/Key
TEACH
TEACH
Switch/Key
TEACH
TEACH
Switch/Key
TEACH
UP
UP
UP
UP
RUN
RUN
RUN
RUN
RUN
Excess gain
(10 times)
999%
100%
0%
Display
Display
Display
incident light or
interrupted light
interrupted light
Stable incident
90% to 110%
Description
110% min.
90% max.
Unstable
Unstable
Stable
light
E3X-NA@
A bar display (with four green and one red) showing excess
gain is provided in addition to the orange operation indicator.
Use these when adjusting the light axis and setting the
sensitivity at setup.
Hold down the UP Key during
detection. Let the workpiece
pass while the key is held down.
Set the TEACH/RUN selector
switch to RUN (start of mea-
surement).
1
Display/indicator status (for L/ON)
Operation description
Displays
Operation indicator
Excess gain level display
Switch/Key
TEACH
UP
RUN
110% to 120%
90% to 110%
Excess gain
80% to 90%
120% min.
80% max.
Approx.
Approx.
Approx.
Approx.
Approx.
level
Display
interrupted light
interrupted light
incident light or
Stable incident
Description
Unstable
Unstable
Stable
light