Q60VR3LAF2000Q1 BANNER ENGINEERING, Q60VR3LAF2000Q1 Datasheet - Page 3

• Manufacturer Part Number: Q60VR3LAF2000Q1
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of Q60VR3LAF2000Q1

• Output Current: 5A
• Sensor Output: SPST-NO
• Sensor Housing: Rectangular
• Sensing Range Min: 200mm
• Sensor Input: Laser
• Body Material: ABS/Polycarbonate
• Supply Voltage Max: 250V
• Sensing Range Max: 2000mm
• Sensing Mode: Adjustable-Field
• Sensor Body Material: ABS/Polycarbonate

Banner Engineering Corp.
www.bannerengineering.com • Tel: [phone]
Figure 4. Q60LAF performance
2.0
4.0
6.0
-10
-12
-1
-2
-3
-4
-5
-6
-7
-8
-9
0
200
0
•
200
Minneapolis MN, U.S.A.
400
400
Cutoff Setting (mm) with 90% White Card
Cutoff Setting (90% White Card)
600
600
Cutoff Point Deviation
800 1000 1200 1400 1600 1800 2000
800 1000 1200 1400 1600 1800 2000
Q60LAF Series Laser Adjustable-Field Sensors
Hysteresis
Color Sensitivity
The effects of object reflectivity on cutoff distance, though small, may be im por tant for
some ap pli ca tions.
The excess gain curves on page 1 were generated using a white test card of 90%
reflectance. Objects with reflectivity of less than 90% reflect less light back to the
sensor, and thus require pro por tion ate ly more excess gain in order to be sensed
with the same reliability as more reflective objects. When sens ing an object of very
low reflectivity, it may be especially im por tant to sense it at or near the distance of
maximum excess gain.
It is expected that at any given cutoff setting, the actual cutoff distance for lower
reflectance targets will be slightly shorter than for higher reflectance targets (see
Figure 4). This behavior is known as color sensitivity.
The percentage of deviation indicates a change in the cutoff point for either 18% gray
or 6% black targets, relative to the cutoff point set for a 90% reflective white test card.
For example, the cutoff point decreases 10% for a 6% reflectance black target when
the cutoff point is adjusted for 1700 mm (67") using a 90% reflectance white test
card. In other words, the cutoff point for the black target is 1530 mm (60") for this
setting.
NOTE: Sensing at closer than the minimum specified range is not guaranteed.
300
250
200
150
100
Class 1 Laser 18% Gray Card
Class 2 Laser 18% Gray Card
50
0
200 400
*NOTE: Minimum range is independent of target reflectivity
300
250
200
150
100
Cutoff Distance (mm) with 90% White Card
Class 2 Laser 18% Gray Card
Class 1 Laser 18% Gray Card
50
Minimum Range vs. Cutoff Setting*
0
200 400
600
*NOTE: Minimum range is independent of target reflectivity
6% Black Card
6% Black Card
Cutoff Distance (mm) with 90% White Card
Minimum Range vs. Cutoff Setting*
800 1000 1200 1400 1600 1800 2000
600
6% Black Card
6% Black Card
800 1000 1200 1400 1600 1800 2000
Class 1
Class 1
P/N 114348
Class 2
Class 2
3