SBR1 BANNER ENGINEERING, SBR1 Datasheet - Page 24

• Manufacturer Part Number: SBR1
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Thru Beamr

Specifications of SBR1

• Turn On Time: 1ms
• Sensor Housing: Rectangular
• Sensor Input: Optical
• Turn Off Time: 1ms
• Sensing Range Max: 150ft
• Sensing Mode: Opposed
• Range: 150-ft With SBE Emitter
• Body Style: Rectangular
• Brand/series: Multi-Beam®
• Function: Module, Proximity
• Primary Type: Photoelectric
• Range, Measurement: 45 m
• Technology: Photoelectric
• Termination: 3, 4-Wire Cable
• Operating Temperature: –40°C to 70°C
• Lead Free Status / Rohs Status: RoHS Exempt Product

24
MULTI-BEAM
2-Wire Scanner Blocks
SPECIFICATIONS
SUPPLY VOLTAGE: connections are made via a 2-wire power
block (see page 27).
RESPONSE TIME: 10 milliseconds ON and OFF (3000 operations
per minute). NOTE: a built-in false pulse protection circuit holds the
output off for 100 milliseconds after power is initially applied to the
sensor.
REPEATABILITY OF RESPONSE: see individual sensor specs.
SENSITIVITY ADJUSTMENT: easily accessible, located on top of
scanner block beneath o-ring gasketed screw cover. 15-turn clutched
control (rotate clockwise with a small screwdriver to increase gain).
ALIGNMENT INDICATOR: red LED on top of scanner block.
Banner's exclusive, patented Alignment Indicating Device (AID™)
circuit lights the LED whenever the sensor detects its own modulated
light source, and pulses the LED at a rate proportional to the received
light level.
CONSTRUCTION: reinforced VALOX
totally encapsulated. Stainless steel hardware. Meets NEMA stan-
dards 1, 3, 12, and 13.
OPERATING TEMPERATURE RANGE: -40 to +70 degrees C
(-40 to +158 degrees F).
MULTI-BEAM 2-wire Sensors
2-wire MULTI-BEAM
Functional Schematic, 2-wire MULTI-BEAM
®
housing with components
The components of the MULTI-BEAM 2-wire family of modular self-contained
sensors are physically identical to the 3- & 4-wire components. However, the 2-
wire components are designed to wire directly in series with an ac load, exactly
like a limit switch. This design makes the 2-wire MULTI-BEAM impossible to
wire backward.
MULTI-BEAM 2-wire scanner blocks with their 10 millisecond response time
have approximately the same optical performance as the 1-millisecond 3- & 4-
wire scanner block models.
The off-state leakage current of 2-wire MULTI-BEAM sensors is less than 1
milliamp, the lowest value of any 2-wire photoelectric sensor. This makes the
MULTI-BEAM 2-wire photoelectric device the most probable such device to
interface directly with ac inputs of programmable logic controllers (PLCs).
Functional Schematic, 2-wire Scanner Block
Dimension Drawing,
2-wire Scanner Block