EO60-Q08-RN6X BANNER ENGINEERING, EO60-Q08-RN6X Datasheet - Page 3

• Manufacturer Part Number: EO60-Q08-RN6X
• Description: PHOTO SENSOR RECEIVER
• Manufacturer: BANNER ENGINEERING

Specifications of EO60-Q08-RN6X

• Peak Reflow Compatible (260 C): No
• Rise Time: 1ms
• Leaded Process Compatible: No
• Opto Case Style: Module
• Supply Current: 30mA
• Operating Temperature Range: 0°C To +50°C
• Supply Voltage Range: 10V To 30V

Clearwater Tech - Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]
Supply Voltage and Current
Output Configuration
Output Rating
Output Response Time
Repeatability
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Application Notes
Certifications
Supply Protection Circuitry
10 to 30V dc at 25 mA; 10% maximum ripple
Protected against reverse polarity
Solid-state dc output, with four output types available:
NPN sinking/light operate
NPN sinking/dark operate
Light operate outputs conduct when the receiver sees the reflection of its own modulated light source;
Dark operate outputs conduct when the sensor sees dark.
150mA maximum, continuous
Off-state leakage current is 100 microamps at 30V dc
On-state saturation voltage is < 200 millivolts at 10 mA dc and < 1 volt at 150 mA dc
1 millisecond ON and OFF independent of signal strength
200 microseconds (0.2 milliseconds), independent of signal strength
Two LED indicators:
Green:
Yellow:
Black epoxy-painted die-cast zinc housing, polysulfone thermoplastic lens with two through-mounting holes
to accommodate M3 (#4) hardware
Meets NEMA standards 1, 2, 4, 6, 12 and 13; IEC IP67
PVC-jacketed 2 m (6.5') or 9 m (30') cable or 3-pin Pico-style quick-disconnect (QD) fitting available. See
page 4. Cable is 4.0 mm (0.16") in diameter.
Temperature:
Maximum relative humidity: 90% at 50°C (non-condensing)
The horizontal axis of the beam pattern represents a line extending outward from the optical center of the
Q08 sensor, and perpendicular to the sensor’s lens. For purposes of mounting and alignment, note that
the optical center of the Q08’s lens is not the same as its mechanical center. The drawing in figure 2
shows the location of the Q08’s optical center.
Q08 Series Diffuse-Mode Sensor Specifications
Lights to indicate dc power ON
Lights when sensor output is conducting (in “light” condition for light operate models; in
“dark” condition for dark operate models)
0° to +50°C (+32° to +122°F)
Q08 Series Diffuse-Mode Sensors
PNP sourcing/light operate
PNP sourcing/dark operate