Q106EQ BANNER ENGINEERING, Q106EQ Datasheet - Page 4

• Manufacturer Part Number: Q106EQ
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of Q106EQ

• Output Current: 150mA
• Supply Voltage Range Dc: 10V To 30V
• Sensor Input: Optical
• Supply Voltage Max: 30VDC
• Sensing Range Max: 1.8m
• Switch Terminals: Quick Connect
• Sensing Mode: Opposed
• Supply Voltage Min: 10VDC

Q10 Series
All hardware shown is supplied with each sensor.
Flat Mounting
an unsafe condition which could lead to serious injury or death.
Only MINI-SCREEN
designated, are designed to meet OSHA and ANSI machine safety standards for point-of-operation guarding devices. No other
Banner sensors or controls are designed to meet these standards, and they must NOT be used as sensing devices for
personnel protection.
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441
WARRANTY: Banner Engineering Corporation warrants it products to be free from defects for one year. Banner Engineering
Corporation will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned
to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of
Banner products. This warranty is in lieu of any other warranty either expressed or implied.
!
Machine Screw
12mm Long
M2.5 x 0.45
WARNING
necessary to allow their use in personnel safety applications. A sensor failure or malfunction can result in either
an energized or a de-energized sensor output condition.
Never use these products as sensing devices for personnel protection. Their use as a safety device may create
™
, MULTI-SCREEN
These photoelectric presence sensors do NOT include the self-checking redundant circuitry
™
, MACHINE-GUARD and PERIMETER-GUARD Systems, and other systems so
Mounting Specifications
Stand-off Mounting
Nylon Spacer
Telephone: [phone]
Split Lockwasher
M2.5 x 0.45 Machine Screw
25 mm (1.0 in) long
Hex Nut
FAX (applications) [phone]